|
|
| Leviton OSC04-IOW Occupancy Sensor Infrared Ceiling Sensor |
|
Item# 86556
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Covers 360 degrees and 450 square feet
- Ultrasonic sensing prevents false triggering from air conditioning and other factors
- Small and unobtrusive to blend into almost any decor
- Light sensor won’t turn lights on when it detects sunlight to avoid wasting energy
- Non-volatile memory stores settings, even in the event of a power outage
Essential Info
Designed to work with the Leviton OSPxx power pack, this occupancy sensor saves you energy and money by making sure lights don’t stay on if no one is in the room. It uses three color-coded, low-voltage wires and a single mounting post for hassle-free installation. A light sensing photo cell also ensures the lights don’t come on when there is ample sunlight to avoid wasting electricity. A Fresnel lens creates divides the detection area into dozens of different segments for optimum sensitivity. Using passive infrared (PIR) technology, the sensor will turn the wired lights on if motion is detected. The lights will stay on as long as the sensor thinks the room is occupied. If movement is no longer sensed, the lights will automatically turn off. You’ll save money by ensuring lights aren’t left on longer than they need to be. Or stop fumbling for a light or lamp switch in rooms that may not have a switch conveniently located near the entrance.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
|
Specifications
|
| Specifications | | General | | Manufacturer | Leviton | | Manufacturer Product No. | OSC04-I0W | | UPC | 078477180532 | | Lens Type | High Density | | Coverage | 450 square feet | | Controls | | PIR (Infrared Sensitivity) | High to low | | Timer Adjustment (Manual) | 30s to 30 min. Factory set 10 min. | | PC (Photocell Adjustment) | 20 to 3,000 Lux - Factory set 3,000 Lux (Disable photocell) | | Other | | Construction | Housing - Rugged, high-impact, injection molded plastic. Color coded leads are 6" long (16.24 cm). | | Dimensions | 4.5" diameter, 1/5" high (114 mm diameter, 38 mm high | | Weight | 5 oz (142 g) | | Power Requirements | 24 VDC, 20mA from the OSPxx-series power pack | | Output | 24 VDC active high logic control signal with short circuit protection | | Operating Environment | 32 to 104 degrees F (0 to 40 degrees C), 0 to 95% relative humidity, non-condensing. For indoor use only. | | Warranty | Five-year limited |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|