Add $175.00 for FREE shipping
One Wire Does It All!
Power, Audio and Video Via One Network Cable
AIRSIGHT POEPASS-03 AIR 802 Power-over-Ethernet (PoE) Kit
AIRSIGHT POEPASS-03 AIR 802 Power-over-Ethernet (PoE) Kit
AIRSIGHT POEPASS-03 AIR 802 Power-over-Ethernet (PoE) Kit
Item# 82199
Customers rated this product 5 Stars
2 customer ratings
Free shipping on orders over $175 - See Details

Overview

  • No outlet needed by your camera, power your camera via your router
  • Powers camera via router with CAT5, CAT5E, or CAT6 Ethernet network cable
  • Power crystal clear audio, video and power from up to 100 feet away (see More Info)
  • 3.5mm x 1.35 mm DC Connectors
  • Compatible with all X10 AIRSIGHT cameras

Essential Info

Did you know that you can power your IP cameras through your wireless router? It's true! If you have an IP camera wired directly to your router, there is no need to run a separate power cord! No need for a power outlet right by your IP camera! Who wants multiple cords running through their home or business anyway? All you need is this PoE (Power-over-Ethernet) and you can connect your IP camera to your wireless network and power it up with one CAT5 / CAT5E or CAT6 Ethernet network cable. This passive PoE kit allows for the efficient delivery of power over the network cable for shorter distances. This set contains an injector and breakout or splitter component. The injector inserts the DC voltage onto the network cable at the source location. The DC voltage is then carried over the network cable. The breakout or splitter extracts the DC voltage from the network cable into the splitter jack, powering the IP camera.

  • This easy kit works with all X10 AirSight IP Cameras (you will need a separate model if you have the AirSight PTZ Pro Camera).
  • For compatiblity with other camers, please verify that the 3.5mm x 1.35 mm jack willbe compatible.
  • Other Applications: IP Telephones, WLAN Access Points, Bluetooth Access Points, IP Surveillance Cameras, Data Collection, Time and Attendance Control, HVAC and Lighting Controls, Badge/Card Readers, RFID, 802.11 WLAN Bridges and CPE, 802.16 WiMAX

    Typical Setup:












  • What's Included

  • 1x - AIR 802 Power-over-Ethernet with 3.5 mm x 1.35 mm injector plug (M)
  • 1x - AIR 802 Power-over-Ethernet with 3.5 mm x 1.35 mm injector plug (F)
  • More Info

    AIR802 has developed passive Power-over-Ethernet (PoE) kits or sets with various size DC connectors. This device provides a low cost solution for delivering power over the network cable. This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable. The source power could be the power supply that came with the wireless access point, IP video surveillance camera, etc. or it might be another power supply.

    This set contains a very cost effective injector and breakout or splitter component. The injector inserts the DC voltage at the source location into the 3.5 mm x 1.35 mm injector plug. The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable. The breakout or splitter extracts the DC voltage from the network cable onto the 3.5 mm x 1.35 mm splitter jack. AIR802 offers this product in two other DC connector sizes (5.5 mm x 2.1 mm) and (5.5 mm x 2.5 mm). If you have an application requiring another size, contact our office.

    The manufacturer can't specify any precise operating distance. Determining the distance in any given scenario is an electrical calculation that would require knowledge of the wire gauge being used, the input voltage and current. However it is possible to achieve up to the full length of an Ethernet network cable at 100 meters (328 feet), if for example the input voltage and current was high enough to accommodate the voltage drop. The input voltage drops over the distance of a wire and will be less at the output.

    Basic Power-over-Ethernet (PoE) Information
    Power-over-Ethernet (PoE) is commonplace and very useful allowing DC power voltage to be carried through a CAT5, CAT5E, or CAT6 type cable. This eliminates the need for an AC power outlet nearby any equipment being installed in ceilings, on outside walls or other locations, where power outlets are not conveniently installed. Under the right conditions, with standard PoE injectors, power may be carried over the 100 meter (328 feet) distance limitation of a single network cable run.

    There have been two traditional means of accomplishing PoE. One is what AIR802 refers to as pre-802.3af compliant PoE (sometimes referred to as 802.3af Mode B), which is less costly to implement and offers other advantages. The second is 802.3af (or 802.3af Mode A) compliant devices at each end of the network cable. These are known as the power sourcing equipment (PSE) and the powered device (PD) in 802.3af terminology. The use of 802.3af Mode A provides interaction between the PSE and PD to turn power on or off, etc., where passive, pre-802.3af, or Mode B technology provides an always on DC voltage (the voltage depends on the input to the injector). Pre-802.3af technology or 802.3af Mode B uses the spare pairs (pins 4,5,7 and 8) of an Ethernet network cable to deliver the DC power. Products using 802.3af may deliver power over pairs one and two (pins 1,2,3 and 6) in what is referred to as mode A. Use of the spare pairs can only be used in 10BASE-T and 100BASE-T networks. A 1000Base-T network uses all four pairs. There are many products in the market that use PoE. Some use passive pre-802.3af (802.3af mode B) and some use 802.3af compliant technology.

    Specifications

    Injector Plug: 3.5mm x 1.35mm
    Splitter Jack: 3.5mm x 1.35mm
    Overall Length: 19 cm (7.5 inches).
    Network Type: 10BASE-T, 100BASE-T
    Data Pins: 1&2 and 3&6
    Power Pins: 4&5 and 7&8
    Input Voltage Max: Up to 60VDC
    Output Voltage Max: Up to 60VDC
    Operating Temperature: -40° C ~ 60° C (-40° F ~ 140° F)

    Important notes:
    Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
    Manufacturer contact information: Authinx Inc, dba X10 PRO USA, Tel: (888) 384-0969

    Reviews

    2 Ratings
    5 star: 100%  (2)
    4 star: 0%  (0)
    3 star: 0%  (0)
    2 star: 0%  (0)
    1 star: 0%  (0)
    Average Customer Rating
    (2 customer ratings)
    Share your thoughts with other customers

    Accessories

    Cat. 5 Cable  Cat. 6 Cable     
    Cat. 5 Cable  Cat. 6 Cable     

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark