Overview
|
- Programmable module is part of Xantech's SmartPad3 IR distribution system
- Module learns IR commands to distribute to A/V components located remotely
- No PC programming required
Essential Info
Control multiple A/V components from anywhere in your house. The Xantech SmartPad3 system uses IR-learning, programmable modular keypads wherever you want an easy-to-use interface, consolidating up to eight remotes into one easy-to-use panel. The XPS Single-Gang Programmable Module is easily programmed with IR commands without PC programming, thanks to Xantech Point & Shoot Technology. The module requires a keypad, which is sold separately, and can be used alone or as a component in an extensive IR distribution system. This device is compatible with all Xantech IR sensors, emitters and connecting blocks (sold separately).
Manuals/Software
What's Included
Module
Connection board
Connection wire
Mounting hardware
Instructions
|
More Info
|
Multiple Control OptionsThis XPS Single-Gang Programmable Module is the base module for programming all of the functions required for each installation. Keypad buttons can be programmed with either a single IR command or a multi-command sequence, including a pause from 1 to 30 seconds between each command. Two-tiered programming is also possible on each button, allowing you to access a different function for a selected device with a second button press (e.g., "power on" and "disc skip" on one button in the CD bank). Programming is stored in advanced EEPROM, so no back-up batteries are necessary. The XPS Single-Gang Programmable Module uses a 3-conductor wire to connect to a connecting block, power supply, and emitters. Smart Pad3 can also be used to control X10 devices through an IR command console.
Additional Programmable Modules AvailableThe XPS Programmable Module is also available in a dual-gang size. Also available is the Dual-Gang Programmable Module, which learns IR commands from your handheld remotes or can be programmed with Windows-based "Dragon Drop-IR" software.
|
Specifications
|
Specifications | | Xantech Product No.: | LMX1000 | | UPC: | 042777312627 | | Dimensions: | 4 1/8" x 1 3/4" x 1 3/4" | | Memory: | 8KB EEPROM | | IR Carrier Frequency: | 31.25 kHz to 71.5 kHz | | Power Requirements: | 12V DC (75 mA without STATUS; 85 mA with STATUS) | | Connector: | 4-screw terminal block | | Conductors: | Normal 3-wire Xantech IR receiver system compatible | | Cable Requirements:: | 4-conductor/24-gauge up to 150'; 22-gauge up to 400'; 20-gauge up to 1000'; 18-gauge up to 2000; unshielded okay | | Maximum Peak IR Signal Output Current: | 100 milliamps | | Status Terminal Power Management Turn-On Voltage: | 5 to 30V DC (8 mA @ 12V DC) | | Factory Default Code Group Setting: | D8 | | Depth Behind Mounting Plate: | 2 1/4" (57mm) |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
View Cart 
