• Easily connects home run wires from multiple IR Receivers to the input
• High current design allows amplifiers rated as high as 500 watts to be used
• One-in eight-out or eight-in one-out capability
• Nine 4-terminal plug-in connectors on 4-conductor bus
• Screw terminals handle wire sizes from 24 to 12 gauge

Connecting multiple IR Receivers to a single connecting block used to be a mess of wires coming to a single point. The Xantech CB18 Strip-IR 8x1 Parallel Connecting Block easily connects home run wires from multiple IR Receivers to the input of a Connecting Block. The Parallel Connecting Block can also be used the opposite way. For example, a single input can connect to 8 outputs. This can be useful for speaker wiring runs to connect a single input to 8 different rooms and volume controls. The high current design with a 12 amp peak allows for amplifiers rated as high as 500 watts to be used.

• Owner's Manual

1x - Strip-IR 8x1 Parallel Connecting Block

1x - Set of mounting screws

1x - Double-sided adhesive tape

1x - Set of VGGS labels

1x - Set of L+L-R+R- labels

1x - Owner's manual

Xantech DL85 LCD Proof Designer Dinky Link IR Receiver	Xantech ML85 LCD Proof Designer Micro Link IR Receiver	Xantech Universal Wall Link IR Receiver

Xantech 791-44 Amplified 10 Emitter Connecting Block	Xantech 12V 500mA Regulated Power Supply - 781ERGPS	Global Cache IR Converter—GC100 To Xantech	1-Zone Connecting Block (1 Emitter Out)