• 35 Watts per channel (Bridgeable)
• Selectable Channel Modes
• Adjustable input Sensitivity
• DC Voltage Controlled (main power)
• Low Impedance Capability
• Auto Protection
• Rack Mountable

The Xantech PA635X 35 Watt 6-Channel Power Amplifier was designed to meet the audio power amplifier needs of custom installed multi-zoned systems with high sonic quality. It's 6-5-4-3 multi-channel capability permits a wide variety of other uses as well, such as surround sound home theater applications. Six 35-watt power amplifiers permit the PA4100X to drive 3-zones in a multi-zone system - each with a 35-watt stereo amplifier per zone. The rack-mount design, plus multiple amplifiers in a single package, delivers high quality at a reasonable price. The input levels are individually adjustable (per stereo pair) from a low of 0.2 volts up to 3 volts. This gives the ability to adjust the overall gain of the system or zone. For instance, there may be a need to adjust the amplifier to deliver a controlled, maximum sound level into a zone when the volume control on the preamp is set to maximum. This would act as a volume limiter for any particular zone (i.e. to prevent the kids from over-driving wall speakers, etc.).

Each pair of amplifiers can be bridged to allow several channel and power output capabilities. It can be configured into four power packages as follows Which gives the PA635X added use in many other applications, such as driving surround sound speaker systems:

Six 35-watt amplifiers

One 70 and four 35-watt amplifiers

Two 70 and two 35-watt amplifiers

Three 70-watt amplifiers

• Owner's Manual
• Sample Application Diagram

Xantech 100 Watt 4-Channel Power Amplifier	12-Channel, 6-Zone Power Amplifier	6-Channel, 3-Zone Power Amplifier with IR Control