|
|
| Micro Link Round IR Sensor White |
|
|
| Item# 8130WR |
|
|
|
|
|
|
Overview
|
- Control audio/video equipment from 40 feet away
- Unobtrusive design allows for stealth installations
- White color blends with your decor
- Installation and trim hardware included
Essential Info
Xantech's Micro Link IR sensor is only ½ inch in diameter and 2 inches deep. It comes with seven feet of 3-conductor ribbon cable and separate screw terminal block for connecting to a connecting block or additional cable. A RF grid in the sensor's pick-up windows helps reduce EMI (electro magnetic interference). Typical range is 30 feet and an acceptance angle is 110 degrees. Has a superior infrared modulation frequency bandwidth of 30 to 100 kHz. Requires a Xantech connecting block as well as IR emitters and power supply (sold separately). NOTE: The status LED on your IR repeater should only be lit when it is receiving an IR signal from your remote control. If you notice that the LED is always on, you may be getting interference from your television or the ambient light in the room. This will cause the system to overheat and will burn out prematurely. There are LCD Plasma safe kits which filter out the interference coming from your television.
Manuals/Software
What's Included
Round Micro IR Sensor - 490W00
Terminal block
Mounting screws, washers
|
More Info
|
The sensor has its electronics housed in a brass cylinder. The "business end" of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the sensor. The high sensitivity of this receiver gives you the ability to place it farther away from the hand held remote, increasing the placement options you have.
Talkback green LED tests system for correct wiring as well as indicates infrared reception.
The Micro Link IR receiver is also available with a brass bezel.
|
Specifications
|
Specifications | | Manufacturer: | Xantech | | Mfgr Product No.: | 490W00 | | Power Requirements: | 12 volts DC @ 10 mA 12 volts DC @ 10 mA (sold separately) | | Infrared Bandwidth: | 30 - 100 kHz | | Dimensions: | 1/2" (13mm) diameter, 2" (51mm) deep | | Cable Requirements for Long Distances: | 3-conductor/24 gauge up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK) | | Nominal reception range: | >30 feet | | Nominal reception angle: | 55 degrees off axis |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|