|
Find Similar Products in:
|
|
|
| 4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5 |
| Item# 81265 |
|
|
|
|
|
|
Overview
|
- Alternate high-definition video distribution between four inputs and four outputs
- Front panel provides current input and output status via LED indicator lights
- Using component and coaxial digital audio outputs, you can distribute HD video and audio to four zones
- Use the Cat. 5 outputs with the component/digital outputs for eight total video outputs (two for each zone)
- Connect up to three additional units for 16 HD video outputs (zones)
- 32 total outputs using Cat. 5
- Supports resolutions of 1080p, 1080i, 720p, 480p and 480i
- Controllable through IR and RS232 commands
Essential Info
You don't need to install multiple satellite dishes or cable boxes in order to watch high-quality video in several locations in your home. The Xantech 4-Source, 4-Zone HD Video Matrix Switcher has four high-definition component video and coaxial digital audio inputs, and provides pristine video and audio distribution output of those signals to up to four HD monitors. Additionally, distribution output up to eight monitors is possible using the Cat. 5 outputs and a Single Gang HD Component/Cat. 5 Receiver Module, sold separately. One Cat. 5 connection corresponds with one component video connection, so if both are being used in conjunction, they will be turned on or off together as a zone. The Cat. 5 outputs and HD Receiver are typically needed for installations where the connection from the video matrix switcher to the HD monitor is longer than 250 feet; as it will work up to 1000 feet away from the video matrix switcher; how they can also be used in lieu of a component connection. Using the included infrared (IR) remote control, you can alternate between sources you wish to distribute and toggle the output of each zone on and off. You also can expand the number of zones by daisy-chaining multiple units together; a maximum of 4 video matrix switchers can be linked. Additionally, you can program macros using the included RS-232 cable. Connections to and from the 4-Source, 4-Zone HD Video Matrix Switcher require the use of Component video cables, coaxial digital audio cables, and/or Cat. 5 cable, each sold separately. If a 4-Source, 4-Zone HD Video Matrix Switcher isn't enough, consider using the 8-Source, 8-Zone HD Video Matrix Switcher. Important Note: This video matrix switcher distributes one HD video feed at a time; switching sources will change the video feed for all zones. Due to excessive weight, Smarthome will add a heavy-item shipping charge to this item. This charge will be reflected in the shipping amount on the check-out page.
Manuals/Software
What's Included
4-Source, 4-Zone HD Video Matrix Switcher, Component and Cat. 5
Power Cord
Credit Card Remote Control
3V Lithium Battery (for Credit Card Remote Control)
Expansion Cable
6 foot RS232 DB9 Cable
Owner's Manual
|
More Info
|
Cat. 5 Zone Output
This is an output connection to the Single Gang HD Receiver module. It utilizes standard Cat. 5 cable. Be sure to verify Cat. 5 wiring connection is correct before installation
Source Loop-through Connection
The source inputs are buffered to provide an output at the same level as the input; i.e. Unity Gain (assuming a 75-ohm termination is on the output). Use these connections for HD88 expansion systems. The buffers are an active circuit. The HD88 must be powered on for an active connection. The jacks are color-coordinated to match the HD source component output color scheme.
Source Inputs
These are Gold-plated RCA jacks providing a connection from the output of a source component to the video matrix switcher. The jacks are color-coordinated to match the HD source component output color scheme.
IR Receiver
The rear panel IR receiver is a 3.5mm Stereo jack that is compatible with all Xantech IR receivers, such as the 291-10. Switch 4 must be in the OFF position to use this jack.
IR Bus, Emitter Port
The 3.5mm Mono jack is an emitter port. The IR signal is connected to the IR Receiver. A Xantech emitter can be connected to this port.
RS232 (Serial) Commands and Expansion
The RS232 Port is bi-directional. The communication parameters are set to 9600 Baud 8-N-1. The 4-Source, 4-Zone HD Video Matrix Switcher can be expanded into larger systems. By using any multiple (up to four) units, a larger High-Definition distribution system can be created for up to 16 Zones of Component Video and Digital Audio Distribution. The expanded units must have their own unique address. The included RS232 expansion cable allows the units to be daisy-chained via the RS232 control ports. This is done by connecting the SERIAL LINK port of the master to the XANTECH COM PORT of the other unit. The XANTECH COM PORT of the master is utilized to provide control of the entire system. Note that the Master is the main controlling unit. This unit is in charge of coordinating the communications between all expanded units. It is identified as the master by the unit address assigned to it.
|
Specifications
|
Specifications | | Manufacturer: | Xantech | | Manufacturer Product No.: | HD44CC5 | | UPC: | 042777313723 | | Dimensions: | 17" W x 7 3/8" D x 3 15/16" H | | Weight: | 9.25 lbs | | Power Supply: | 120VAC, 0.25A, 50-60Hz, cord included | | Temperature Threshold: | Up to 55° C | | Remote Controllable: | Yes, via IR (remote control included) and via RS-232 commands | | Video Input: | Component Video YPbPr (YCbCr); unit features gold plated RCA connectors | | Audio Input: | SPDIF PCM Coaxial; unit features gold plated RCA connectors | | Active A/V Loop Thru (for Expansion):: | Gold plated RCA connectors | | Resolution Support: | 1080p, 1080i, 720p, 480p and 480i | | Video Output: | Component Video YPbPr (YCbCr); unit features gold plated RCA connectorsCat. 5 | | Audio Output: | SPDIF PCM Coaxial; unit features gold plated RCA connectors | | Output Distance: | 250 foot maximum via component video connection; 1000 foot maximum via Cat. 5 cable connection |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|
8-Source, 8-Zone HD Video Matrix Switcher, Component and Cat. 5
|
8-Source, 8-Zone HD Video Matrix Switcher, Component
|
1-Source, 6-Zone HD Video Distribution Amplifier, Component and Composite
|
9-way HD Component Video Distribution Amplifier
|
|
|
|
|
|
5-way HD Component Video Distribution Amplifier
|
4-way HD Component Video Distribution Amplifier
|
Component Video Distribution Amplifier
|
6x4 Component Video Matrix Switcher / Splitter
|
|
|
|
|
|
Auto-Sensing Component Video Switch
|
9-way Component Video Distribution Amp
|
1-Source, 6-Zone HD Video Distribution Amplifier, Component and Composite
|
Single Gang HD Component/Cat. 5 Receiver Module
|
|
|
|
|
|
Single Gang HD Video Transmitter Module, Component And Cat. 5
|
ATON 4-Source, 4-Zone HD Component Video and Digital Audio Matrix Router
|
ATON 4-Source, 4-Zone HD Component Video and Digital Audio Matrix Kit
|
|
Customers Also Bought
|
|
|
|
|