Add $175.00 for FREE shipping
Shop All!
Connector Type
3.5mm Connectors
RCA Connectors
Compatibility
1/8" (3.5mm) Mini- Jack
Composite
Infrared (Standard Consumer Electronics)
Features
Expandable Zone Capacity
Hardwired
IR Controllable
LED Feedback
Plug-In
Remote Controlled
Wired
Initial Zone Capacity
4 Zones Included
Maximum Zones
9 Zones
Ease of Installation
Intermediate (Installs < 60 minutes)
Brand
Xantech
Other Ways to Shop
On Sale
Order the Smarthome Catalog


Add 4 Additional Zones of Control to Your Xantech Remote Preamp
Xantech EXP9-4 Four Zone Expansion Module for ZPR68-10
Xantech EXP9-4 Four Zone Expansion Module for ZPR68-10
Xantech EXP9-4 Four Zone Expansion Module for ZPR68-10
Item# 81236
Price: Normally $1650.00 
Hot Deal $744.28
Qty:
Free shipping on orders over $175 - See Details

Overview

  • Expand the number of zones your ZPR68-10 controls
  • Additional ports allow you to add zones
  • Gold plated RCA phono jacks
  • Operates with the Xantech RC68+ remote (the same as the ZPR68-10)

Essential Info

The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 has the capability to expand the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control.

The EXP9 series is available with from 1 to 9 "XCARDs" (zone expansion PCBs) installed in its nine available openings. The EXP9-4 comes equipped with 4 cards, pre-loaded and tested at the factory, to give you 10 zones of control when combined with your ZPR68-10. Unused zone openings are covered from underneath with individual cover plates. These are removed, as needed, when additional zone XCARDs are installed in the field.

EXP9 units are also available with any number of XCARD zones:Expansion/replacement XCARD zone cards for this item are available here. To rack mount your EXP9 please see the RMEXP.

Manuals/Software

What's Included

  • EXP9-1 unit
  • Power supply
  • More Info

    • The features, functions and performance of the zones on the EXP9 are identical in every way to those of the ZPR68-10
      CAUTION: The EXP9 cannot operate by itself. It must be connected to a ZPR68-10. Also, it will not operate with the original ZPR68 (older version).
    • The EXP9 connects to the ZPR68-10 via two multiconductor ribbon cables (included). One is a 26- conductor cable, the other 50.
    • As with the ZPR68-10, the EXP9 uses a multi-voltage high-current AC power supply (included).
    • Control of all zones is also possible via the COM PORT (RS232 data signal compatible) on the connected ZPR68-10.
    • As with the ZPR68-10, the EXP9 operates with IR commands from the Xantech RC68 IR Remote/Programmer (available separately). As received from the factory, each zone (as well as the XCARDs) is set to IR Code Group number 68.

    Specifications

    AUDIO (ea. channel)
    • Gain (@ max VC): Unity
    • Input Overload: > 4 V RMS (@ max VC)
    • Input Impedance: > 40 k Ohms
    • Output Impedance: 470 Ohms
    • Signal to Noise: 96 dB (re 2V out)
    • THD (VC -10 dB): 0.01% at 2V input level
    • Frequency Response (± 3 dB): 5 Hz to 70 kHz
    • Bass Control Range (@ 100 Hz): ± 12 dB (in 2 dB steps)
    • Treble Control Range (@ 10 kHz): ± 12 dB (in 2 dB steps)
    VIDEO
    • Input/Output Impedance: 75 Ohms
    • Video Insertion Loss: < 1.0 dB (50 Hz to 10 MHz)
    GENERAL
    • RC68 Code Group Number assigned to the EXP9 (each zone): 68
    • STATUS Output (each zone): 12 V @ 10 mA, 9 V @ 90 mA (90 mA is max. current)
    • Max. Total Current Available From +12V & STATUS Terminals: 1.8 A
    • Power Requirements: 14V-0-14V AC @ 2.7 A, 8V-0-8V AC @ 0.7 A (Multi-Voltage Power supply included)
    • Gold Plated RCA type phono jacks: All A/V inputs/outputs
    • Dimensions: 14" W x 7 " H x 2.5" D
    • Weight: 4 lbs, 3 oz.

    Important notes:
    Only defective exchanges for identical item within Manufacturer’s warranty period. No other returns allowed on this item. For defective returns after 30 days, please contact the manufacturer.
    Manufacturer contact information: Xantech LLC, Tel: (800) 843-5465 Ext 355

    Reviews

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark