|
|
| Dinky Link Quick Connect Receiver - Black |
|
|
| Item# 8120QB |
|
|
|
|
|
|
Overview
|
- Works in normal 3-wire mode
- 3.5mm plug makes connection simple
- Talkback red LED blinks confirmation
- Black color blends with your TV or other components
Essential Info
This IR receiver is ideal for hidden mounting in the space behind speaker grills. Just point your remote at the speaker to control your system. Ths Quick-Connect Dinky Link plugs directly into Xantehc's connecting blocks with its 3.5mm plug. Up to four can be connected in series; use a Xantech 1-Zone single-emitter or 4-emitter connecting block (sold separately) for emitter expansion. The black color of the Dinky Link receiver blends with your room's decor; if you prefer, it is also available in white.NOTE: The status LED on your IR repeater should only be lit when it is receiving an IR signal from your remote control. If you notice that the LED is always on, you may be getting interference from your television or the ambient light in the room. This will cause the system to overheat and will burn out prematurely. There are LCD and Plasma safe kits which filter out the interference coming from your television.
Manuals/Software
What's Included
Black IR sensor
Terminal block
Mounting tape
Instructions
|
Specifications
|
Specifications | | Manufacturer: | Xantech | | Manufacturer Product No.: | 480B30 | | UPC: | 042777480302 | | Dimensions: | 7/16" x 5/16" x 2-1/8" (11m x 8mm x 54mm) | | Infrared Modulation Frequency Bandwidth: | 30 - 100kHz | | Nominal Reception Range: | >30 feet | | Nominal Reception Angle: | 55 degrees off axis | | Maximum Current Output: | 100mA | | Maximum Number of Directly Driven IR Emitters: | Up to four connected in series (Use Xantech Connecting Blocks for emitter expansion) | | Power Requirements: | 12 volts DC @ 10mA |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|