|
|
|
|
| Micro Link Plasma-Friendly IR Receiver |
|
|
| Item# 8112P |
Free shipping on orders over $200 details
|
|
|
|
|
|
Overview
|
- Small size, only 2.5 inches deep (64mm)
- Quick-connect 3.5mm stereo mini plug on 7ft. cable for direct plug-in to Xantech connecting blocks
- Works in normal 3-wire mode
Essential Info
So you've invested in a plasma screen but now you're having trouble with your IR signal reception. The Xantech Plasma-Friendly IR Receiver is designed specifically to reject interference from plasma displays that enters the IR signal line. It also rejects interference from direct sunlight and fluorescent tube lights for accurate IR signal reception.
Manuals/Software
What's Included
One Xantech Plasma-Friendly IR Receiver
One CB12 Connecting Block
|
More Info
|
These small IR receivers are intended to be mounted in panels, doors, cabinets, etc. for control of A/V equipment behind closed doors or any IR repeater system that is in close proximity of a plasma display. The Xantech Plasma-Friendly IR Receiver, equipped with a 7-foot cable and 3.5mm stereo mini plug, is intended to be plugged directly into the "IR RCVR" or "AUX" jack on Xantech Connecting Blocks, such as the included CB12. It should be used in installations where the connecting block is within reach of the 7-foot cable — such as when installing the unit in a cabinet where the controlled equipment is behind closed doors.
The Xantech Plasma-Friendly IR Receiver requires 3-conductor cable. Use 24 gague up to 200' (61M), 22 gauge up to 600' (182.5M), 20 gauge up to 2000' (610M) 18 gauge up to 5000' (1.5KM) — unshielded OK. Note: The Xantech Plasma-Friendly IR Receiver (#8112P) is compatible with our Xantech and SpeakerCraft IR distributing equipment but is NOT compatible with the Buffalo systems.
|
Specifications
|
Specifications | | Xantech Product No.: | 490-95 |
| Power: |
Requires a 781RG power supply | | IR modulation frequency bandwidth: | 30-100 kHz | | Reception range: | 60 ft | | Reception angle: | 55 degrees off axis for 50% range reduction | | Max transmission length: | 1 mile using 18 gauge wire | | Max current output: | 100mA | | Power: |
12Volt 200mA regulated power supply | | Resists interference from: | Plasma, LCD, CFL, sunlight |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
|
|
|
|