|
|
| Hidden Link IR Kit LCD CFL Resistant |
|
|
| Item# 81105K |
|
|
|
|
|
|
Overview
|
- Resists interference from LCD displays or CFL lighting
- Attractive case for shelf-top locations
- Red talkback LED tests system for correct wiring as well as indicating infrared reception
- Attached 7' cable and 3.5 mm mini plug permits direct plug-in to connecting blocks
Essential Info
Use this shelf-top IR receiver when you can't drill into a cabinet or piece of equipment to use the smaller hidden sensors. Xantech's Hidden Link sensor is about an inch high and about 3.25" wide and include a 'talkback' LED so you'll know the command was received and sent to the emitter. This version of the Hidden Link Expansion Kit is resistant to interference from LCD displays or CFL lighting. This product is not compatible with Scientific Atlanta HD8300 series cable boxes. If you have one of these boxes you would need to use the plasma proof versions listed here.
Manuals/Software
What's Included
291-80 Tabletop IR Sensor
(4) 283M Visible Blinking Stick-On IR Emitter
789-44 Connecting Block
781RG 12-Volt DC Power Supply 200MA
Instructions
|
More Info
|
The Xantech IR Hidden Link Expansion Kit includes:
- 1 Tabletop IR Sensor (#8110CFL). This table top sensor picks up IR signals up to 90 degrees and up to 30 feet away. Equipped with a 7-foot cable and 3.5 mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the included one-emitter connecting block or any connecting block we carry. IR modulation frequency bandwidth: 30 - 60 kHz.
- 4 Visible Blinking Stick-On IR Emitter (#8160). The #8160 is a single headed emitter that produces a blink when operating. This is helpful in troubleshooting an IR distribution and works well when the equipment is inside a cabinet where the blinking will not distract the user.
- 1 Zone Connecting Block. The One Zone Connecting Block collects signals from room IR sensors, processes them and sends the signals to your audio/video equipment via an infrared emitter. Connects four emitter ports and power supply to all Xantech infrared receivers and keypads.
- 1 12-Volt DC Power Supply 200MA. Standard 12-Volt DC power supply for the one zone connecting block.
|
Specifications
|
Specifications | | Manufacturer: | Xantech | | Manufacturer Product No.: | 291-80KIT/RP | | UPC: | 042777315079 | | Pick-up Range: | 30 ft. | | Pick-up Angle: | 90 degrees | | IR Bandwidth: | 30-60 kHz | | Dimensions: | 3 1/4"w x 1"h x 2"d | | Rejects interference from: | LCD, CFL, sunlight |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|