Add $175.00 for FREE shipping
Learn More!
Compatibility
Radio Frequency (RF)
RF Transmission
Features
LCD Display
Wireless
Maximum Zones
40 Zones
Ease of Installation
Advanced (Installs > 60 minutes)
Brand
GE Security
Other Ways to Shop
In Stock
On Sale
Order the Smarthome Catalog

Full-Featured Security Controller Operates During Power Outages
GE Security 80-632-3N-XT Simon Wireless System with Battery Backup
GE Security 80-632-3N-XT Simon Wireless System with Battery Backup
GE Security 80-632-3N-XT Simon Wireless System with Battery Backup
Item# 79514
Price: Normally $360.00 
Hot Deal $196.06
Qty:
Free shipping on orders over $175 - See Details

Overview

  • 40 wireless zones (two can be hardwired)
  • Built-in PSTN 2-way voice capability (over GSM with optional module)
  • Supports both Crystal and SAW Learn Mode sensors
  • Supports repeaters
  • Supports 2-way RF products

Essential Info

Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection and complies with SIA False Alarm Standards. With a built-in display touchpad and status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums.

The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). The built-in radio receiver works with both Crystal and SAW Learn Mode sensors.

Simon XT supports off-premise telephone control to arm and disarm the system, check system status, activate no entry delay, or activate the latchkey feature. With latchkey capabilities, the panel can be programmed to notify customers if the system has not been disarmed at a scheduled time.

Note: This item is not currently X10 compatible

What's Included

  • Simon XT Security Control System
  • Power Supply
  • Rechargeable 24 hour backup battery
  • Telephone jack and flat cord
  • More Info

  • 40 wireless zones - two can be hardwired (normally-closed loop only)
  • Built-in PSTN 2-way voice capability (over GSM with optional module)
  • Supports both crystal and SAW LearnMode sensors
  • Supports repeaters
  • Supports 2-way RF products (version-specific)
  • Indoor and outdoor motion sensors
  • Chime feature for monitoring door, window, or motion activity
  • 1 master access code and 8 programmable user access codes of 3 to 6 digits
  • SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN (native) and/or optional GSM and IP modules
  • Programmable No Activity and No Usage report features
  • Meets SIA False Alarm Standards
  • 100-event buffer with time-and-date stamp
  • Panel voice and beeps that can be disabled
  • Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
  • Firmware flash upgrades can be done remotely

  • Expansion options
  • Internet-based interactivity (with third-party providers)
  • Support for on-premises remote control with optional talking touchpad accessory (available separately)


  • Specifications

    Electrical
    • Required Transformer: Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada)
    • Fuse: Non-replaceable transformer fuse
    • Backup Batteries: 6 VDC, 1.2 Ah lead acid (60-914)
    • Backup Time: 24 hours (fully charged)
    • Battery Test: 10 seconds under load every 4 hours
    Radio Receiver
    • Type: SAW-controlled superheterodyne
    • Frequency: 319.5 MHz/ Bandwidth 350 kHz
    • Sensitivity: -110 dBm nominal
    • Nom. range without GSM module present: 1000-ft. open-air receiving range
    • Nom. range with GSM module present: approx. 500-ft. open-air receiving range
    Telephone/Modem
    • Dialing: DTMF or pulse
    • Modem: Modified Bell 103 (110 or 300 bps)
    • Telephone Interface: Line seizure relay Inputs/outputs
    Inputs/Outputs
    • Total Input Zones 40 or 38 wireless and 2 hardwire (normally-closed loop only)
    • Auxiliary Power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
    • Siren Output: 1 Hardwire Interior Siren (5.1 to 9 VDC)
    Digitized Voice
    • Digitization Type: Continuous Variable Slope Delta (CVSD) Modulation
    • Playback Rate
    • 88,200 bits/second
    Environmental
    • Operating Temperature 32 to 122° F (0 to 49° C)
    • Relative Humidity 90% max., noncondensing
    Physical
    • Color: White
    • Dimensions: (LxWxD) 5.7 in. x 7.05 in. x 2.1 in. (144 mm x 179 mm x 53 mm)
    • Weight, without battery: 1.0 lb. (454 g)
    • Installation: Wall mount
    • Construction, chassis: ABS
    Regulatory
    • FCC: Part 15, Part 68
    • UL: 985, 1023, 1635/ULC Listing ORDC102319-74,ULC-S545-M89
    • CSFM: California State Fire Marshall
    • CP01

    Reviews

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark