| General Specifications |
| Manufacturer | MuxLab |
| Manufacturer Product No. | 500124 |
| UPC | 627699001241 |
| Environment | CCTV composite baseband video; NTSC, PAL, SECAM |
| Devices | CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment |
| Video Specifications |
| Bandwidth | 20 Hz to 8 MHz |
| Input | 1.5 Vp-p max, 100Ù, balanced (RJ45) |
| Output | 1.1 Vp-p, ± 1 dB, 75Ù, unbalanced (BNC) |
| Insertion Loss | -14 dB minimum for luma, -60 dB minimum for chroma - Determined by Automatic Gain Control |
| Return Loss | Greater than 15 dB over the frequency range |
| Common Mode Rejection | Greater than 40 dB @ 3.85 MHz |
| Ground Loop Isolation | Up to +/-50VDC |
| Auto Polarity Correction | Automatically adjusts for any polarity |
| Max. Distance via Cat5e/6 | NTSC: 5,000 ft (1.5 km)
*Coax jumper cables must be less than 30 ft (9m) |
| LED Diagnostics | Power, Video Sync |
| Auto Gain Control (AGC) | Automatically adjusts for gain, sharpness and luminosity |
| Remote Power Specifications |
| Wiring | Remote low voltage power supported via two (2) twisted pairs, a Class II power supply is recommended |
| Max. Distance @ 24VAC via Three Twisted Pairs | 2 VA: 1,500 ft (457m)4 VA: 745 ft (227m)10 VA: 300 ft (91m)20 VA: 150 ft (46m)Based on 10% voltage drop at camera
Longer distances may be achieved @ 28 VAC |
| Max. Current | Fuse supports 2.5A rms or DC. Fuse trips @ 5A |
| 2-Wire PTZ Control Specifications |
| Wiring | Remote 2-wire PTZ control supported via one (1) twisted pair |
| Maximum Distance | Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor |
| Maximum Input Voltage | 48 Volts (AC RMS/DC) |
| Maximum Current Rating | 2A (AC RMS/DC), no fuse |
| Mechanical & Environmental Specifications |
| Cable - UTP | 24 gauge or lower solid copper twisted pair wireImpedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/footAttenuation: 6.6 dB/1000 ft at 1 MHz |
| Cable - Coax | Impedance: 75 Ohm at 1 MHz (RG59/U) |
| Connectors | Video: BNC-FRemote Power: 2-pole screw terminal blockPTZ: 2-pole screw terminal blockCat5e/6 Link: RJ45SPower connectorGnd screw terminal |
| Compatible Baluns | MuxLab part #'s: 500000, 500000R, 500009, 500022, 500024, 500100/101 |
| Power Supply (included) | 5VDC/6W/100mA max. Floating +/- 20%. 150mA max. Interchangeable blades |
| Transient Voltage Protection | ± 2.5V on the video line± 48V on the power and control lines |
| AC/DC power surge protection | Above 34VAC RMS or +/- 48 VDC |
| Fuse Protection | Auto-resettable fuse on 5VDC input and Power A (+) upon power cycling |
| Temperature | Operating: 0° to 55° CStorage: -20° C to 85° CHumidity: up to 95% |
| Enclosure | ABS fire retardant plastic |
| Dimensions | 2.40" x 2.25" x 1.0" (6.1cm x 5.7cm x 2.54cm) |
| Weight | 3 oz (85 gms) |
| Regulatory | FCC and CE |
| Manufacturer Warranty | 2 Years |