 Hassle-Free Video Channel Switching, Either Manual or Open-Collector
|
|
|
Radio Design Labs TX-MVX Manual Remote Controlled BNC Video Switch, 2x1
|
|
| Radio Design Labs TX-MVX Manual Remote Controlled BNC Video Switch, 2x1 |
|
Item# 77957
|
|
Price: Normally $125.28
Hot Deal $81.77
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Manual switching of video
- Open-collector switching of video
- 2 x 1 video selection
- 1 x 2 video routing
- Operation with NTSC or PAL
- Remote controlled video switching
Essential Info
The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals. VIDEO A is normally connected to COMMON. When the TRIG terminal is pulled to ground, VIDEO B is connected to COMMON and VIDEO A is disconnected. The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination. The actual switch (or other module actuating the switch action) may be located remotely from the TX-MVX. Many RDL modules feature an open-collector SLAVE control terminal. These terminals may be used to control the TX-MVX. Alternatively, relay contacts on other equipment may also be used to control the TX-MVX. For example when used with other RDL modules, the TX-MVX could switch video: - Using audio detection from an external audio source
- Using video detection from another video source
- At a prescribed time during a power-up sequence
- From logic signals
- Using wall-mounted remote controls
Use the TX-MVX individually in NTSC or PAL systems, or combine it with other RDL products and various mounting accessories as part of a complete audio/video system. This item requires a power supply such as the PS-24K for operation.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Only defective exchanges for identical item within 30 days of purchase. No other returns allowed on this item. For defective returns after 30 days, please contact the manufacturer.
Manuals/Software
|
Specifications
|
Input(s), Output(s): BNC, ground-referenced TRIG Input Current: 2 mA TRIG Input Threshold: 2 Vdc Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 30 mA Ambient Operating Environment: -10° C to 55° C
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|