|
|
| Cat-5 Distribution Receiver |
|
|
| Item# 77801R |
|
|
|
|
|
|
Overview
|
- Receiver accesses component or composite video and digital or analog audio transmitted over cat. 5
- Connect up to 2 rooms 300' from transmitter (sold separately)
- Built-in IR channel allows connection to external IR remote control systems
Essential Info
Distribute high-definition component or composite video and digital or left and right audio over extended distances using inexpensive cat. 5 wire. The Cat. 5 Distribution Receiver works with the Cat. 5 Distribution Amplifier - Transmitter (sold separately), which delivers a single component video signal or three composite video signals along with digital or analog audio up to 300 feet in 1080i; if you use cat. 6 cable instead, the maximum distance is 500 feet. Each connected room will require Cat. 5 Distribution Receiver; the transmitter can support up to two rooms.
Manuals/Software
What's Included
Receiver
Power supply
Wiring diagram
Instructions
|
More Info
|
Expandable System Connects Additional Video SourcesThe Cat. 5 Distribution Amplifier/Transmitter features video and audio loop output to accommodate future expansion to additional cat. 5 transmitters and receivers. Additional features include a discrete passive IR channel for the use of external IR remote control systems.
|
Specifications
|
Specifications | | CE Labs Product No.: | CAT5 RX | | UPC: | 617190002129 | | Dimensions: | 6.85" x 3.25" x 1" | | Connections: | 1 component video or 3 composite video connections & digital or left/right analog audio | | Power Requirement: | External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector | | Warranty: | 1 year, limited |
Video | | Nominal Input Level: | 1 Volt peak to peak | | Gain: | 1 Volt into 75 ohms (2 Volts unterminated) | | Output Impedance | 75 ohms | | Isolation Port to Port: | > 65 dB | | Isolation Out to Input: | > 80 dB | | Return Loss: | > 30 dB | | Video Bandwidth: | > 50 MHz (HDTV requires 37 MHz min.) | | Distance: | 300 feet @ 1080i (500 feet with CAT6 cable) |
Audio (Analog) | | Nominal Input Level: | 1 Volt peak to peak | | Gain: | Unity (slightly reduced at max cable length) | | Input Impedance: | 22k ohm | | Output Impedance: | 1k ohm | | Frequency Response: | 20 Hz to 20 KHz | | Signal to Noise Ratio: | 80 dB @ 1 Volts out | | Digital Audio: | Supports standard SPDIF digital audio |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|