|
|
| 1GHz 1x1 RF Amp Bidirectional 20db |
|
|
| Item# 7771 |
|
|
|
|
|
|
Overview
|
- Experience distortion-free pictures on every TV in the house
- Powerful 20dB forward gain offers more than enough support to handle demand
- Superior performance to inexpensive, store-bought RF amplifiers
Essential Info
With all the TVs, VCRs and satellite receivers found in most homes today, the demand for video signals can easily overburden the video signals coming into the house (i.e. signals from cable companies or antennas). The result: A degraded video signal that leads to noisy, distorted TV images. The good news is that that problem can be easily remedied by adding one of these 1GHz RF Bi-Directional Amplifiers before the signal is split, resulting in clear, noise-free performance throughout the house. Power supply included.
What's Included
1GHz RF Bi-Directional Amplifier
Power supply
|
More Info
|
Each time you split or divide the RF signal to feed all your equipment, you lose about half the power, or 3dB. For example, a passive splitter with 8 ports may have more than 10dB of loss! One way to overcome this loss is to install an amplifier. However, this solution may cause additional problems if the original signal exceeds the amplifier's rated capacity. But thanks to the high 20dB forward gain, the 1GHz RF Bi-Directional Amplifier offers more than enough support to handle the demand. Plus, integrated 20dB adjustable attenuation allows you to control the signal without over-amplifying the TVs. Example: If you hear buzzing when type is superimposed on the TV screen, like on commercials that display a phone number, then you have an over-amplified signal.
Unlike standard amplifiers, this model was constructed with a diplex filter to separate the forward and return path, allowing it to send and receive without any signal loss.
Additional Amplifiers AvailableA 1GHz 1X1 RF Bi-Directional Amplifier is also available with 15dB of gain. Need to split your signal in addition to amplifying it? Accomplish both tasks at once with the 1GHz 1x4 RF Bi-Directional 8dB Amplifier.
|
Specifications
|
Specifications | | Manufacturer: |
Cable Electronics | | Manufacturer Product No.: | 6001 | | Analog Compatibility: | All VHF, UHF, CATV channels | | Digital Compatibility: | DTV, HDTV, Digital Cable | | Bandwidth: | 1GHz | | Forward Gain: | 20 dB | | Forward Adjustable Attenuation: | Up to 20 dB | | Forward Path Bandwidth: | 54-1000MHz | | Return Path Bandwidth: | 5-40 MHz | | Forward Path Signal Flatness: | +/- 1.5 dB | | Noise Figure Max.: | 2 dB | | RFI Shielding: | >85 dB | | Power Supply: | External plug-in transformer 12Volt, 200mA (included) | | Module Dimensions: | 5 1/8" x 3" x 1 1/2" |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|