|
Find Similar Products in:
|
|
|
| SECO-LARM E-9611-2B25 ENFORCER Curtain IR Motion Sensor, 2 Beams - Black |
|
Item# 77587BK
|
|
Price: Normally $150.00
Hot Deal $49.97
|
|
|
|
|
|
Free shipping on orders over $50 - See Details
|
|
Overview
|
- Rugged aluminum construction
- LED alignment indicator
- No synchronizing wires required
- NO/NC relay output
- Weatherproof IP65 construction
- Slimline design (7/8"x1-5/16")
- Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)
- For windows, doorways, etc., where space is limited
- L-brackets and mounting hardware included
Essential Info
The SECO-LARM E-9611-2B25 ENFORCER Curtain IR Motion Sensor is perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited. Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed. No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included. There is a normally open (N.O) and a normally closed (N.C.) relay output that can be used to communicate with your security system. These sensors are ideal for monitoring any possible entry point to your property, and because they are weatherproof, they are the ideal choice for almost any indoor or outdoor application. The Curtain IR Sensor is also available in: 2 Beams, Black
4 Beams, Black and White
6 Beams, Black and White
8 Beams, Black
Manuals/Software
What's Included
Enforcer Curtain / Barrier Sensor (Transmitter)
Enforcer Curtain / Barrier Sensor (Receiver)
Four (4) mounting brackets
Mounting hardware
Owner's manual
|
More Info
|
Connecting Multiple Curtain Sensors
Several units can be connected together in parallel to the same power supply output and alarm input of an alarm control panel.
Tamper Protection
The receiver and the transmitter both have a tamper switch on one end to protect against someone attempting to open the unit. However, there is no separate tamper output to the alarm control panel. Instead, the alarm output is triggered if the cover of the end cap with the tamper button is removed, if the transmitter or receiver is moved out of alignment, or if power is disconnected.
Running the Wires
Run four wires (2 x power and 2 x alarm signal) from the alarm control panel to the receiver of the curtain sensor. 4 Conductor, 22-Gauge Shielded Cable is strongly suggested.
Weatherproof Construction
Ingress Protection (IP) is rating for electronic products as it relates to the amount of sealing they have against the entry of solid and liquid objects. Complete details of this standard can be obtained from the IEC. This uniform and widely acknowledged classification system provides equipment designers and specifying agents with a convenient and reliable method of comparing relative levels of sealing between competing (connector) products. In its simplest form, the classification system consists of the letters "IP" followed by two separate digits, which denote increasingly greater sealing from solid objects and from water.
The Enforcer Curtain / Barrier Sensor has a rating of IP65. The number '6' refers to the degree of protection against access to hazardous parts and ingress of solid objects, 6 is the highest rating at "dust tight; complete protection against contact". The number '5' refers to the degree of protection against the ingress of water. 5 is one of the highest levels of protection, "Water projected by a nozzle against enclosure from any direction shall have no harmful effects."
|
Specifications
|
Voltage: 12~24VDC
Standby Current: 82mA
Active Current: 67mA
Number of Beams: 2
Max. range: 25' (8m) outdoor, 50' (16m) indoor
Output: NO/NC relay output, 1A @ 12~24VDC
Operating temperature: -49º~131º F (-45º~55º C)
Attenuation LED: (On): powered, aligned properly,(Flash): when beam is broken,(Off): no power
Length: 11-1/4" (28.5cm)
Width x Height: 1-5/16"x7/8" (33.5x22.3 mm)
Case: A1 alloy
Response time: 0.5~25 ms
Hardware: Mounting Bracket Included
|
|
|
Important notes:
Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manufacturer contact information: SECO-LARM USA Inc, Tel: (949) 261-2999
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|
|
|