• Indicates the condition of rechargeable gel-type 12VDC batteries
• Visual LED indicators: Blue - Excellent, Green - Good, Yellow - Weak, Red - Bad
• Equipped with a momentary simulated load
• Built-in alligator clips for easy connection
• Reverse-polarity protection
• Portable and easy to use

The ENFORCER ST-BT02Q 12VDC 6-in-1 Battery Tester with Continuity is a compact unit that performs six essential troubleshooting tests in the field, including continuity testing. Four individually lit LEDs show the strength of the voltage present from excellent to poor, two separate LEDs show the progress of the test, and one LED shows continuity during continuity testing. The illuminated pigtail connector shows AC, DC, and polarity, while included alligator clips allow easy connection in any situation.

Performs 6 essential tests in the field:

Continuity Testing: Check the continuity of a circuit, wire run, or dry contact.

Voltage Testing: Check the voltage of power sources in the field without a multimeter.

Load Testing: Apply a simulated 1A or 500mA load to power sources to check the under load.

Polarity Testing: Check polarity of wires using the illuminated power connector.

Voltage Drop Testing: Check the amount of voltage drop over long cable runs.

PTC Fuse Testing: Check the integrity of PTC fuses.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Owners Manual

1x - 6 in 1 Battery Tester

2x - Built-In Alligator Clips

Extech Instruments True RMS Single Phase Power Analyzer	Channel Vision M2000 Handheld Signal Strength Meter Tests Satellite and RF Energy	Nuvo Technologies NV-AW1 Allport Tester for Simplese System	Etcon VT157 ProVolt Digital Audible Voltage/Continuity Tester, Solenoid Type
Etcon VT159 Digital Non-Contact AC/DC Voltage Tester With Continuity	LCD Digital Multifunction Voltage Tester

SECO-LARM SL-1311-MA/R High Intensity 1W 4 LED Module - Red	SECO-LARM SL-1311-MA/B High Intensity 1W 4 LED Module - Blue	SECO-LARM SL-1311-MA/A High Intensity 1W 4 LED Module - Amber	EnviroAlert 2 Zone Environmental Monitor Base Unit