• Compensate DC voltage drops over long cable run
• Selectable 12 or 24 VDC output via jumper
• Dual-color LED power output indicator
• Built-in overload and short-circuit protection

For security installations that require long runs between a monitor or DVR and the surveillance cameras, often times the cameras may fail or stop working completely as a result of DC voltage (power) loss to the camera. The Enforcer Voltage Booster overcomes this issue, by adding up to 500mA of power to a wire that doesn't have enough gauge (wire thickness) to maintain the correct voltage over a long run. A typical application would require running 12VDC to a camera located 300' from the power source. The maximum wiring distance for 12VDC@250mA would normally be approximately 90 feet. After 90 feet the voltage will start to drop below 12VDC. Installing the Enforcer Voltage Booster at the camera end of long wiring runs can greatly increase the maximum wiring distance. This device will work with both 12VDC and 24VDC installations. Built-in LED indicator light let you know what voltage you are working with and whether input power is connected. As an added feature this device also has built-in overload and short circuit protection.

• Owner's Manual

Enforcer Voltage Booster (500mA)

Owner's Manual

Smarthome Day/Night Cam, 66 LEDs, Black	Smarthome Bullet Camera	24 IR LED Indoor/Outdoor Vandal-Resistant Color Dome Camera	4 Channel H.264 Network Dvr With 250 Gb
Enforcer Regulated 1.0 Amp Voltage Converter	Enforcer Regulated 0.5 Amp Voltage Converter

Illuminated Female DC Power Plug Connector	Male DC Power Pigtail