|
|
| Enforcer Twin Photobeam Detector, 390 Foot Range |
| Item# 77400 |
|
|
|
|
|
|
Overview
|
- Twin (two) infrared beams provide reliable perimeter security
- Weatherproof design ideal for outdoor applications - with an outdoor range up to 390 feet
- Quick, easy installation with built-in laser beam alignment system
- Adjustable frequency and interruption time
- Built-in Normally Open and Normally Closed relay output
Essential Info
An ultra-reliable security system means more than just monitoring possible entry ways into your home or business, it also means monitoring the perimeter of your property. The Enforcer Twin Photobeam Detector uses two infrared beams of light to create a detection barrier up to 390 feet in length when used outdoor (up to 790 feet indoor). Ideal for monitoring your property line, this product features weatherproof construction, sunlight-filtering, anti-frost system and a built-in heater, making this product the perfect outdoor solution built to withstand harsh environmental conditions. The built-in laser beam alignment system decreases installation time while providing accurate, reliable positioning and extended range of the detector. There is even an LED alignment indicator to assist you with the setup. The lensed optics reinforce beam strength and provide excellent immunity to false alarms due to falling leaves, birds, inclement weather, etc., and the interruption time is adjustable for nearly all situations. It also offers normally closed/normally open alarm outputs in addition to a normally closed tamper circuit that can be used to communicate with your security system. Lastly, a selectable 4-channel beam frequency allows the sensor beam frequency to be set at different levels to avoid interference from other photobeam sensors nearby.
Manuals/Software
What's Included
Enforcer Twin Photobeam Detector Transmitter
Enforcer Twin Photobeam Detector Receiver
Two (2) Mounting plates
Two (2) sets of pole mounting brackets
Mounting hardware
Owner's Manual
|
More Info
|
Adjusting the Delay Time
The delay time adjustment knob sets how long the beam can be interrupted before triggering the alarm. A short delay time (high sensitivity) is suitable for catching fast moving intruders, but more susceptible to false alarms. A long delay time (low sensitivity) reduces false alarms, but fast moving intruders may not trigger the sensor.
Running the Wires
Run a cable from the alarm control panel to the photobeam sensor. If burying the cable is required, make sure to use electrical conduit. 22-Gauge, 20-Guage, 18-Guage, or 17-Guage shielded cable is strongly suggested.
|
Specifications
|
Specifications | | Manufacturer: | SECO-LARM | | Manufacturer Product No.: | E-964-D390Q | | Dimensions: | 6.8" x 2.9" x 2.8" (173mm x 74mm x 72mm) | | Weight: | 2.5 lbs. (1.1kg) | | Maximum Outdoor Range: | 390' (120m) | | Maximum Indoor Range: | 790' (240m) | | Current: | 90mA | | Power: | 12 ~ 12 VAC/VDC (non-polarized) | | Detection Method: | Simultaneous break of 2 beams | | Interrupt Speed: | 50msec ~ 700msec (variable) | | Alarm Output: | NO./NC. relay, 1A @ 120VAC | | Tamper Output: | NC switch, 1A @ 120VAC | | Alarm LED (Receiver): | Red LED - ON: When transmitter and receiver are not aligned or when beam is broken | | Signal LED (Receiver): | Yellow LED - ON: When receiver's signal is weak or when beam is broken | | Power LED (Tx and Rx): | Green LED ON: Indicates connected to power | | Laser Wavelength: | 650nm | | Laser Output Power: | < or = to 5mW | | Alignment Angle: | Horizontal: +/-90°, Vertical: +/-5° | | Materials: | PC Resin | | Operating Temperature: | -13° F to 131° F (-25° C to 55° C) | | Certifications: | CE, RoHS | | Warranty: | Manufacturer one (1) year |
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|