• Selectable 6 or 12VDC output
• Regulated and filtered output voltage
• Short circuit protection
• Thermal protection and compensation
• Built-in backup battery charger
• Switches to backup battery automatically in case of power loss
• Fused protection for battery charger
• LED indicates AC power input
• Compatible with lead acid or gel-type rechargeable battery
• Reverse polarity protected
• Low operating temperature
• Battery leads and foam tape included
• Compact design

Seco-Larm's ST-series of power supplies/chargers ensures that alarm systems and access control systems always have enough power to do their job. Protected by fused output, input polarity protection diodes, and back-up battery reverse polarity protection, this power supply/charger can be used to maximize the security and efficiency of nearly any alarm or access control installation. This power supply/charger is rated at 1.5 amps continuous, 2.0 amps peak, at either 6 or 12 volts DC.

Requires an open-frame transformer to match your desired voltage output:

For 6VDC output: 12VAC/20VA

For 12VDC output: 16VAC/50VA.

• Manufacturer's Spec Sheet
• Installation Instructions

1x - Power Supply/Charger 1.5A, 2A Peak

1x - Battery Lead

1x - Foam Tape

1x - Instructions

Seco-Larm Enforcer ST-2406-2AQ Power Supply-Charger 1.5 A Continuous, 2A Peak	Seco-Larm ST-2406-3AQ Power Supply/Charger 2.5 Amp/3 Amp Peak	Seco-Larm ST-2406-5AQ Power Supply/Charger 4.0A, 5A Peak	Seco-Larm ST-2406-7AQ Power Supply/Charger 7.0A, 7.5A Peak