• Connect 8 cameras to a PC-based DVR
• Built-in baluns allow you to use inexpensive Cat5 cable
• Allows cable runs up to 2000'
• Send power to 8 camera via Cat5 cable
• Mounts in standard PCI slot

Using baluns for long cable runs makes sense. Cat5 wire is far less expensive than coax, and unlike coax, you can have up to 2000' of Cat5 with no signal loss. This PCI card set allows you to use a balun at the camera end and feed up to 8 video signals to DVR with the included adapter cable using short coax cables. The Power Distribution card installs adjacent to the balun card, and accepts 12VDC power from the included AC adapter. Split the Cat5 wiring, with the signal pairs going to the balun card and power pairs to the power card. The tri-color LEDs in the power jack indicate proper polarity and power present.

Note: requires a Passive VDP Balun at each camera.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Manual for 4-Cam Balun (8-Cam manual not available now)

1x - EVT-PC8-VTQ 8-Port Video Balun PCI Card

1x - EVT-PC8P-JTQ 8-Port Power Distribution PCI Card

1x - VGA-to-BNC Adapter Cable

1x - Instruction Manual