• Designed for concealed placement in most hollow metal doors
• Fail-secure operation (locks if power is lost)
• Adjustable door lock delay timer
• Stainless steel construction and bolt
• Can be mounted opposite the door hinges, or on the header or on top of the door away from the hinges

The Enforcer Fail-Secure Electric Deadbolt can be used with your alarm system or through your intercom system to allow entry access control at the home or at the office. It can also be wired in with a digital keypad near the door to assure high security without the need for a key. The device has an open/close monitor that recognizes normally open (NO) or normally closed (NC) status. An adjustable door lock delay timer will allow you to set the desired time in seconds before the door re-locks. The solenoid will automatically shut off if the door is not closed properly to prevent burning out. Fail-secure operation will lock the door if power is lost. This product requires a 12VDC Power Supply, sold separately.

Also available in a fail-safe version that unlocks when power is lost.

Note: This product is not recommended for wooden door frames. However, the door can be wood or metal.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Manufacturer's Spec Sheet
• Instruction Manual

1x - Fail-Secure Electric Deadbolt

3x - Keys

Mounting Hardware

4x - Mounting Template

1x - Instruction Manual

M1 Ethernet Port Expander/Interface	Elk ELK-930 Doorbell and Phone Ring Detector	ELK Echo Compact 20W Speaker