|
|
| 5.8GHz/IP Video Server |
| Item# 76546 |
|
|
|
|
|
|
Overview
|
- 5.8 GHz wireless technology avoids interference from 900 MHz or 2.4GHz ISM application
- Monitoring and recording locally and over the internet at the same time
- Built-in video server connects to the internet
- Convert any CCTV surveillance into IP surveillance application
- NVR management software provided
Essential Info
- 5.8 GHz frequency has strong immunity of interference from 900 MHz or 2.4GHz ISM applications such as Cordless phone, 802.11b/g Wireless LAN, Bluetooth, Microwave oven, etc.
- Operating frequency: 5733 ~ 5866 MHz (8 channels).
- Wireless receiving range is up to 300 feet with clear line-of-sight.
- Easily convert any CCTV surveillance application into wireless IP surveillance application.
- Ideal solution in setting surveillance where wire/cable installation is not desired or impossible.
- Work with RF-Link’s AWS-5882-01B 5.8 GHz wireless camera for local/remote location monitoring and recording.
- Robust design for industrial and commercial usage.
- High speed hardware-based image compression, generating high quality MJEPG/MPEG-4 streams.
- High S/N video output and stereo audio output.
- Video resolution: 720 x 480/NTSC, 720 x 576/PAL (D1).
- Up to 30 frames/second (D1, CIF, QCIF resolution).
- PC running Microsoft Windows XP Server Pack 2 or above.
- DHCP server on network domain is recommended.
- Microsoft IE browser version 6 or higher is recommended.
- NVR management software provided.
- Variable bandwidth control prevents the data saturation on the network.
- Secure password/username protection restricts access to single user, or the whole internet community.
- Built-in web-based video live viewer.
- Built-in Video Server connects to the internet.
- Change the receiver channel remotely over the internet.
- Record live stream video to local HDD.
- Record, Playback and Snapshot.
- Motion detection.
- E-mail notification.
- Periodic timer (Schedule recording).
- Full-Screen mode or Partitioned-Screen mode.
- Fixed-Channel mode or Auto-Scan mode (Dwell mode) display.
- Auto-Scan time can be set freely from 1 to 120 seconds on each connected camera/channel either locally or over the internet.
- OSD support
- LED for easy system status display (channel or mode number display).
- RJ-45 connector for Ethernet.
- SMA connector for 5.8 GHz antenna.
- Power jack for 8 ~ 32 VDC input.
- RCA connector for audio input.
- BNC connector for video input.
- A/V jack for audio and video output.
- SMA connector for wireless PTZ antenna.
- Wirelessly remote control PTZ over the internet (optional).
- Terminal block for digital input/output (optional).
- Terminal block for RS-485 (optional).
- FCC/IC/CE approved.
Manuals/Software
|
Specifications
|
Input voltage(module): DC 9 ~28V
Current consumption: < 650mA@12VDC
Antenna type: Dipole
Operating temperature: 0° C ~ +60&dge C
Storage temperature: -20° C ~ +70° C
Operating humidity: less than 85%
Storage humidity: less than 90%
Dimensions: 190mm x 125mm x 46mm
RF Input frequency range: 5733 ~ 5866 MHz
RF Input level@ connector: -25 ~ -85dBm
RF Antenna Port Impedance: 50 ohms
RF IF Frequency: 479 MHz
RF Gain flatness: 3 dB max
RF Input returjn loss (@50 ohms): - 10 dB typical
RF LO. drift: ±250KHz
Video Output level: 1V p-p ±0.15V p-p Load
Video Impedance: 75 ohms
Video De-emphasis: NTSC and PAL
Audio Output level: 2 Vp-p
Audio Impedance: 2K ohms
Frequency response: 30 Hz ~ 12 KHz
Audio Carrier Frequency (L): 6.0 MHz ± 25 KHz
Audio Carrier Frequency (R): 6.5 MHz ± 25 KHz
Audio Distortion(@ 1 KHz tone with 25KHz frequency deviation): 1% Typical (THD)
Audio SNR with Pre-emphasis/de-emphasis @ 1 KHz tone input with 2 Vp-p audio: 56 dB Typical
Night Vision Range: 10 m
Video Streams: JPEG still images and Motion-JPEG video, MPEG-4 Encoding, Image frame rate: up to 30 frames/sec at D1 resolution, NTSC: 30 fps@720x480
PAL: 25 fps@720x576
Audio Compression: ADPCM/MP3 compression support
Network Protocol: TCP/IP, HTTP, DHCP, PPPoE, DDNS
PTZ Control: Pelco-D, Pelco-P, or Transparent
Web Browser: Microsoft Internet Explorer 6.0 or above
Management: Configuration: USB Service Port, Remote control the A/V source
Video Input Connectos: BNC
Audio Input Connectors: RCA
Video and Audio Output Connectors: Jack for one to three RCA cables
PTZ (RS485) Connectors: Terminal block
DI/DO Connectors: Terminal block
Antenna Connector: SMA FEMALE
LAN Port Connector: Ethernet (10/100 Base-T), RJ45
USB Configure Port Connector: Mini USB
Power Output Connector: Terminal block (5 VDC)
Optional Wireless PTZ: RS-485 Protocol: Pelco-D, Pelco-P, Transparent
|
Reviews
|
|
|
|
|