• Waterproof for installation outdoors
• 3 LEDs for status indication
• Audible key press feedback
• Tamper switch sends alarm instantly
• Backlight for easy night viewing

This keypad is rugged enough for installation outside in the weather. It's capable of storing codes for three users and sends signals to your alarm or access system via three relay outputs. The EEPROM stores all system information in non-volatile memory in case of power failure. You can program the user codes from over 100 million combinations of four digits. User code 1 may optionally be programmed as a duress code. You may also connect a Push-to-Exit switch to allow egress from the controlled space. A built-in tamper switch instantly triggers the alarm is anyone opens the case. You may also send door-open information to the keypad so it can trigger an automatic re-lock of the door. Requires 12 volts DC or AC from a power adapter, sold separately.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Installation Manual

Wireless 2-Way Keypad	12VDC 1.5A Power Supply	RCI Interior/Exterior Use Stand-Alone Keypad	GE 45117 Wireless Door Alarm with Programmable Keypad

SECO-LARM SL-126Q/R Red Security Strobe Light	SECO-LARM SK-910RB2Q Two-Channel RF Receiver	SECO-LARM Enforcer Single Gang Request-to-Exit Plate with 1" Illuminated Red/Green LED Pushbutton	Enforcer 12V DC 1.25A Power Supply