An easy-to-install system with everything you need to monitor up to 4 cameras sequentially included (one camera included in kit). A sequencer built in to the monitor allows you to view up to 4 cameras one at a time (adjustable 1 to 60 seconds). Manual override buttons on the front of the monitor allow you to switch to a specific camera instantly. Each camera includes a motion sensor so that if movement occurs in it's field of view, the monitor will go to that camera and sound an alert signal (adjustable sound level). Each camera can have its name (Backdoor, Shipping, Lobby, etc.) superimposed on the screen with the time and date.
Two sets of RCA audio and video jacks on the monitor allow you connect a VCR for recording, output the signal to a channel modulator for view on any TV in your home, or attach other monitors. If used with a time laps VCR, the monitor can trigger the VCR into real-time recording via its Alarm Out terminals. Video and audio input jacks allow monitoring of VCR playback or attaching other video cameras.
Easy installation: mount the cameras (a bracket is included with each camera), run the supplied 65'cable from the camera to the monitor. Then plug the monitor into an 110V outlet. The cable between the cameras and the monitor carries the power and audio signals to the camera. A separate power supply for the camera is not required. If more cable is required, use the 100' and 250' extension kits to reach out up to 500 feet. The extension kits just add on to the existing cable, no striping wires, crimping or soldering required!
Each camera includes a built-in microphone so you can be alerted to crying or other sounds. Additionally, a built-in microphone on the monitor and a small speaker on the cameras allow the operator to have a two-way conversation with the person in front of each camera. Push the "Talk" button on the monitor to speak and release to listen. IR illuminators in the camera allow monitoring in near total darkness (short range).
Multi-lingual (English, Spanish, French) instruction manual included.
Camera Specifications
#7621PIR |
| Picture Output | Black & White |
| Image Pickup Device | 1/3" CCD |
| Number of Pixels | 512h x 492v (252K Pixels) |
| Resolution | 380 Lines |
| Minimum Illumination | .1 Lux |
| Lens | 4.3mm, 74 deg. Horizontal field of view |
| Weatherproof | NO |
| Cable Length | 65 foot 6-pin cable included |
| Output Connectors | Female RCA for (Audio and Video) output to a VCR and second monitor |
| Mounting Bracket | 2.5" high surface-mount bracket included |
| Sensor Unit | 20' range 90 deg. field of view |
| Operating Temperature | +14°F to 122°F |
| Dimensions (inches) | 2"w x 1.75"h x 2.5"d |
| Monitor Specifications |
| Picture Tube | 14" B&W Implosion Protected CRT |
| Cameras Switching time | Adjustable: 3 to 60 seconds |
| Power Requirements | 90-250V AC, 60Hz (40 Watts) |
| Dimensions | 12.5"w x 12.5"h x 12.5d |
| Alarm connectors | N/O and N/C connections |
| Warranty | 1 year |
Due to the heavy weight of item #7621S12, an extra $10 will be added to the shipping charge.
View Cart 
