• In-wall video camera w. built-in modulator
• Plugs right into the video distribution coax
• Powered through the coax line
• Greatly simplifies remote camera installation

The CAModulator™ makes it easy to add video cameras that you can view on any TV anywhere in your home. Unlike most cameras that require a cable for the power and video signal, there is only one connection at the video camera, the coax cable.

Simply install in a single-gang J box or dry-wall mud ring. Then, attach a RG-6 coax cable and 2-way combiner into the TV/cable distribution coax. The built-in modulator allows you to inject the video camera signal directly into the TV/cable coax system on an unused cable or antenna channel. The power supply can be located at a convenient location away from the camera since the power is transmitted over the coax cable itself.

The CAModulator™ has a bendable bracket so you can adjust the viewing angle of the camera. Includes two Decora lens (clean and tinted), power injector, and 12-volt DC power supply. (Decora wall plate sold separately.) One-year warranty.

Specifications

Model Black and White Color Camera Lens 3.6mm 3.7mm Resolution 350+ lines 350 lines Min Illumination 0.7 Lux 5 Lux Output Frequency UHF25-69 CATV 70-94, 100-125 Modulation Method Digital Crystal PLL Output Level 27dBmV Power Requirement 12VDC, 300mA Output Connector F-connector,75 Ohm Cable Type RG6 Size 4.0"x 1.9" x 1.7"

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.