• Use on large, loose-fitting doors and gates
• For Closed Circuits
• UL listed for security systems

Use this Garage Door Contact Switch on garage doors, roll-up doors and other doors or gates where it may be difficult to mount regular magnetic contacts. Smaller magnetic switches have a small operating gap where the contact and magnet must be within half an inch for reliable operation. While those switches are fine for most doors and windows in a home, they just won't cut it for larger doors. These contacts can be as far as 2" apart and still operate. These Garage Door Contacts for Closed Circuits are used for systems that expect a closed circuit when the magnet and sensor are together. When the magnet and sensor separate, the circuit opens. This set is commonly used with security systems.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

Garage Door Contacts for Closed Circuits

Cable

Ezio 2 Input/4 Output Relay Controller	Magnetic Contacts	Miniature Magnetic Contacts	Wireless Glassbreak Sensor
Magnetic Contact Switch For Open Circuit Systems	Door, Window & Floor Sensors	Security Systems	12VDC Wired Glass Break Detector
Enforcer Surface-Mount Magnetic Contact Sensor Switch, White	Enforcer Concealed Surface-Mount Magnetic Contact Sensor Switch, White

I/O Linc - INSTEON Low Voltage / Contact Closure Interface ( 1 In / 1 Out )	20 Foot 2 Conductor, 22-Gauge/AWG Interconnect Wire, White	SwitchLinc Dimmer - INSTEON Remote Control Dimmer (Dual-Band), White	Short Round Magnetic Contacts