Overview
|
- Up to 10 miles of line-of-sight range
- Weather-resistant case
- Transmitter accepts N/O or N/C inputs
- Fully supervised (loop status, low battery, link integrity)
Essential Info
You don't need to be on the premises in order to monitor the status of the sensors around your home. When any of four long-range 1-channel or 4-channel transmitters (sold separately) is triggered by an external sensor switch, it sends a digital-encoded RF signal up to 10 miles to this companion receiver, which verifies the digital code, activates its output, and triggers the remote device. A 1-channel and 16-channel long-range receiver are also available.
Manuals/Software
What's Included
Receiver
Instructions
|
More Info
|
Fully Supervised TransmissionThe transmitter has full supervision capabilities. If the "status" option is selected, the transmitter sends hourly status signals to its receiver. If these signals cease, the receiver will indicate trouble by activating its status output after four hours. Contact supervision allows the receiver's outputs to follow the transmitter's inputs, staying activated as long as each transmitter input is activated. Alternately, an "auto-restore" option can be selected, causing a momentary receiver output each time any transmitter input is activated. Each input can be configured for either N/O or N/C contacts (switch selectable). Two 8-position switches set the tansmitter's system code, which must be matched in the receiver. There are 65,536 different system codes possible.
Multiple Power OptionsPower for the transmitter can come from an external regulated 12 VDC power supply or from a 12-volt battery. If the power supply voltage drops below 10.5 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate.
|
Specifications
|
Specifications | | Manufacturer: | Linear Corporation | | Manufacturer Product No.: | SSR00069 or MR164R-XR-4 | | UPC: | 093863103940 | | Dimensions: | 4.25" L x 2.5" W x 6.25" H | | Weight: | 1.5 lbs. (0.68kg) | | Operating Temperature: | -4° to 140° F (-20° to 60° C) | | Operating Frequency: | 27.244 MHz | | Bandwidth: | 6 KHz | | Number of Codes: | 65,536 | | Code Setting Method: | DIP switch programming | | Operating Voltage: | 12 to 15.0 VDC | | Housing: | Black, weather-resistant, anodized aluminum enclosure with removable end caps to provide wiring and programming access; end caps | | RF Output Power: | 12 Watts typical | | Loop Response Time: | 500 msec | | Code Transmissions: | Alarm, restore, status, and low battery | | Status Report Time Frame: | 70 minutes | | Warranty: | 1 year, limited |
|
Reviews
|
|
|
Related Items
|
|
|
|
View Cart 
