|
Portable Transmitter Triggers Remote Device From 2 Miles Away
|
|
|
2-Channel Handheld Long-Range Transmitter
|
|
|
|
| 2-Ch Handheld Long-Range Transmitter |
|
Item# 7426DX2
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Up to two miles of line-of-sight range
- Transmitter functions in 2-channel mode or lockout mode
- Batteries included
Essential Info
Trigger a remote device from up to 2 miles away. The 2-Channel Handheld Long-Range Transmitter sends a two-watt 27.255 MHz, digital encoded, FSK modulated, signal to a companion receiver (sold separately), which verifies the digital code and activates its output to trigger the remote device.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
What's Included
Transmitter
Antenna
Belt clip
2 9V batteries
Alternate faceplates
Instructions
|
More Info
|
Two Operating ModesThe 2-Channel Handheld Long-Range Transmitter is a two-button transmitter with two operating modes. In standard mode, the transmitter is a two-channel device: Pressing the left button sends channel one; the right button sends channel two; both buttons sends channels one and two. In lockout mode, the transmitter will only send a signal on the channel selected when both buttons are pressed. Alternate faceplates are supplied with the transmitter (2-button lockout faceplate shown above). Each transmission is limited to a maximum of 30 seconds duration.
Power DataThe portable 2-Channel Handheld Long-Range Transmitter is powered by two 9-volt alkaline batteries in series, supplying 18 volts. During transmissions, the red operation indicator will light (visible through a window next to the antenna). If the transmitter's battery voltage is low, the indicator will blink during transmissions. If the combined battery voltage drops below 12 volts, a low battery message will be included with any signal transmitted, causing the receiver's low battery output to activate.
Ultra-Secure TransmissionTwo 8-position switches set the unit's system code. This code must be matched in the transmitter's companion receiver. There are 65,536 different system codes possible.
|
Specifications
|
Specifications | | Manufacturer: | Linear Corporation | | Manufacturer Product No.: | XT-2H | | UPC: | 093863104312 | | Dimensions: | 2.375" W x 12.25" H x 1.375" D (60mm x 311mm x 35mm) | | Weight: | 1 lb. (0.454Kg) | | Range: | Up to 2 miles line of sight | | Operating Frequency: | 27.255 MHz | | Bandwidth: | 6 KHz | | Number of Codes: | 65,536 | | Code Setting Method: | DIP switch programming | | Power: | Two 9V alkaline batteries (supplied) | | RF Output Power: | 2 Watts (typical) | | Transmit Time: | Up to 30 seconds | | Code Transmission: | Alarm and low battery | | Antenna Impedance: | 50 Ohms (antenna supplied) | | Operating Temperature: | -4° to +140° F (-20° to +60° C) | | Warranty: | 1 year, limited |
|
Reviews
|
|
|
|
|
|