• Activates one Delta-3 receiver for remote stop or reverse safety edge
• No cables or coiled wires
• Powered by a 9V battery
• 256 possible code combinations
• RF frequency: 310 MHz

The Linear DNT00072 DTG Wireless Safety Edge Transmitter is part of Linear's Delta-3 product line and is compatible with all Delta-3 products. In a typical installation, the Transmitter is mounted on a motorized gate, door or barrier arm and wired to a standard exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of the gate. To insure full compatibility with all gate edge safety features, Linear recommends Miller gate edge sensors (sold separately). If the edge sensor is pressed for a minimum of 1/8 second, the Transmitter sends a message to the receiver to reverse the movement of the gate.

The Transmitter circuit board has been coated to prevent moisture damage and is mounted inside a weather resistant fiberglass box. The mounting box attaches to the gate through sealed interior mounting screws.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Owner's Manual

Linear Delta-3 1-Channel Gate Receiver	Linear Delta-3 2-Channel Wireless Digital Receiver	Linear Delta-3 1-Channel Wireless Receiver

Linear DNR00101 GRD Delta-3 1-Channel Gate Receiver