• Compatible with all Multi-Code radio controls
• Transmitters supplied with visor clip
• Transmitters powered by 9-volt battery
• Three terminal 24-volt receiver connects directly to operator
• 1,024 possible codes combinations
• RF frequency: 300 MHz

The Linear MCS1011 Multi Single Garage Door Radio Controls with Receiver and Transmitter is designed specifically to remotely control a garage door from within an automobile and to give years of dependable service without adjustment. The transmitter/receiver combination utilizes the MULTI-CODE scheme which permits the selection of as many as 1024 code combinations of your personal choice. Because all radio controls are set with the even numbered switches in the "ON" position when they leave the factory, it is recommended that a different code be selected and set at the time of installation. The radio frequency (RF) portion of the controls, however, are tuned to standard frequencies and are thoroughly tested at the factory. This permits the addition or replacement of either the transmitter or the receiver by specifying the Model Number and the RF frequency designated on the identification label. No RF adjustments are needed nor should any be attempted.

• Owner's Manual

Linear Multi Double Garage Door Radio Controls with Receiver and 2 Transmitters	Linear Delta-3 Double Garage Opener with Receiver and 2 Transmitters	Linear Delta-3 Single Garage Opener with Receiver and Transmitter	Hardwired Combination Garage Door Keypad
Skylink R4G Gate Receiver	Skylink R3R Universal Garage Door And Gate Receiver