• Rated at 1A 24VAC/DC
• Receives transmissions from Visonic 200 Series transmitters

This receiver will respond to the wireless RF signals sent by the universal transmitter, motion detector, miniature magnetic contact transmitter, pendant transmitter and 4 button transmitter on this page. The receiver has both normally open and normally closed terminals for each channel. The state of these terminals changes when it receives a signal from a transmitter, eg. the N/C contact becomes open and the N/O contact closes. When the signal stops, the contacts revert to the original state. A transistor output of 12V 25mA that can be connected to a supplied buzzer or other device becomes live when the battery low signal is received from a transmitter. A 12VDC power supply (at least 105mA for 4 channel receiver) is required. Contacts are rated at 1A 24VAC/DC. Four, two and one channel receivers are available. One channel version does not have the battery low output. A 12VDC power supply is required (sold separately).

This receiver responds to the wireless RF signals sent by Visonic 200 series transmitters (each sold separately).

• Manual

1x - 200 Series Wireless 1-Channel Receiver - WR-200

Visonic WT-201 200 Series Miniature Pendant Transmitter	12VDC 500mA Regulated Power Supply	Visonic WT-100 200 Series Universal Transmitter	Visonic WR-200/2B 200 Series Wireless 2-Channel Receiver