Special Purpose PIR Detectors for Automatic Control of Doors, Gates, and CCTV
|
|
|
Visonic DA-5/0-1704-0 PIR Detector for Automatic Door Control
|
|
| Visonic DA-5/0-1704-0 PIR Detector for Automatic Door Control |
|
Item# 73984
|
|
Price: Normally $72.08
Hot Deal $45.05
|
|
|
|
|
|
Free shipping on orders over $50 - See Details
|
|
Overview
|
- Compatible with access control systems and automatic door opening systems
- 3 detection zones with 7 beams per zone
- Protected against reverse polarity
- 1C / 2 Amp output relay
- User-adjustable relay activation time (1-60 seconds)
- Over-the-door wall mounting or ceiling mounting options
- 12 / 24 Volt AC/DC power supply
- Visible Light Filter
- Request-to-Exit PIR Detector
Essential Info
DA-5 is a passive infrared motion detector designed for use with access control and automatic door opening systems. When motion is detected, the DA-5 relay output provides signals activating the door opening mechanism. For maximum flexibility, the output activation time is user adjustable between 1 and 60 seconds. DA-5 is designed for easy installation, with options for over-the-door wall mounting or ceiling mounting. Operating power for the DA-5 may be supplied from a 12 or 24V AC or DC source. A jumper is provided on the printed circuit board for selecting the input voltage. It can be installed at various heights on the wall above the door or on the ceiling with its detection pattern directed at the floor in front of the door.
Manuals/Software
|
More Info
|
The DA-5 consists of a plastic base to which the electronic module is fastened, and a cover assembly with a curved surface to which the milky white lens is attached. Reliable detection is provided through the no. 74 lens used in the DA-5. This lens No. 74 has 3 arrays of lens segments. Each array provides a detection zone, and all 3 zones combine to form the entire detection pattern. Any detection zone or lens segment may be masked. Beam Masking is used when the PIR is too sensitive in a specific zone. Ordinary opaque masking tape can be used to mask individual lens segments of any one of the three detection zones, or an entire zone. The masking tape will prevent the infrared energy from reaching the sensor through the blocked segment. Cut a masking tape patch that fits the dimensions of the lens area you wish to block. Apply it accurately to the inner (grooved) surface of the appropriate segment(s). In some cases, more than one layer of the masking tape may be required to completely block the infrared energy.
The cover must be removed for:
- Installation and wiring
- Adjusting the timer
- Selecting the input voltage
- Inverting the lens for ceiling installation.
|
Specifications
|
Part Number: 0-1704-0
Detection Lens: Lens No. 74
Detection Zones: 3 zones (A, B and C). 7 beams per zone
Detector Type: Dual-element pyro-electric sensor
Input Voltage: 12/24 VAC / DC (protected against reverse polarity)
Relay Switching Capability: 2 A max. at 28 V AC or DC
Output Relay Pull-in Period: 3 to 60 seconds, adjustable
Current Drain: 7 mA standby, 50 mA max @ 12 VDC; 14mA standby, 80mA max @ 24VAC
MOUNTING: Wall or ceiling mounting above the door. Surface mountable on top of a standard single-gang box
Intended Use: Indoors or in water/rain-protected outdoor areas
Height: 2.15 - 3 m (7 - 10 ft)
Operating Temperature: -10°C to 50°C (14°F to 122°F)
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Dimensions: Size: 105 x 65 x 53 mm (4-1/10 x 2-1/2 x 2-1/10 in.)
Weight: 95 g (3.3 oz)
Color: White
|
|
|
Important notes:
Defective exchanges for identical item within Manufacturer’s warranty period.
Manufacturer contact information: Visonic Inc, Tel: (800) 762-7846
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|