|
|
|
| Smoke Detector |
|
|
| Item# 73942 |
|
|
|
|
|
|
Overview
|
- Sound and transmitted alerts in the event of a fire
- Simple ceiling-mount installation
- Battery included
Essential Info
Protect your family and your home from fire! By installing this Photoelectric Smoke Detector in each room or floor of your house, you will be taking an important step in receiving an early alert in the case of fire. This fully supervised wireless smoke alarm is designed for a wide range of residential and commercial applications, providing superior detection sensitivity.
Important Note: Currently, the Visonic Photoelectric Smoke Detector only ships with an operating frequency of 315Mhz. If your area requires a different operating frequency, you will need to contact Visonic directly to purchase the appropriate product.
Manuals/Software
What's Included
Photoelectric Smoke Detector
9-volt battery
Mounting hardware
|
More Info
|
This Photoelectric Smoke Detector senses smoke and provides early warning of developing fire by sounding an alarm with its built-in alarm horn, and by transmitting a coded alarm signal to a compatible wireless alarm control panel. To ensure secure communication, the Photoelectric Smoke Detector's transmissions use a PowerCode™ 24-bit ID command code, which is selected from 16 million possible combinations and is therefore virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices.
The Photoelectric Smoke Detector transmits supervisory reports, including battery condition, to your wireless control panel or receiver (sold separately) at regular intervals, ensuring system integrity and functionality at all times. A rear tamper protection switch is mounted under the PC board. Removal of the unit from the bracket will cause the switch contacts to open, creating a tamper event, which will be reported by the transmitter to the control panel.
Install the Photoelectric Smoke Detector as close to the center of the ceiling or as high up on the wall as possible. The detector should be tested weekly.
|
Specifications
|
Specifications | | Manufacturer: | Visonic | | Manufacturer Product No.: | MCT-425 | | Dimensions: | 5.12" x 2.95" (130mm x 75 mm) | | Weight (Including Battery): | 9.6 oz. (272g) | | Alarm Sound Level: | 85 dB at 10 feet (3m) | | Operating Frequency: | 315 MHz | | Transmitter's ID Code: | 24-bit digital word, over 16 million combinations, pulse width modulation | | Overall Message Length: | 36 bits | | Supervision: | Automatic signaling at 60-minute intervals (315 MHz version), 15-minute interval (433.92, 868.95, 869.2625 MHz versions) or according to the local standards | | Tamper Alerts: | Tamper event (removal of the unit from its bracket) is reported once. Tamper restore is reported when the tamper switch is restored | | Transmission Indicator: | Yellow LED lights upon transmission (visible only when Switch SW-1 is ON) | | Power Source: | 9 Volt alkaline or lithium battery | | Operation Voltage: | From 7.2 V to 9.5 V | | Current Drain: | 28 µA standby, 20 mA in operation | | Battery Life Expectancy: | Alkaline: at least 1 year (for typical use) for battery types Eveready #522, #1222, #216; Duracell #MN1604; or Gold Peak #1604P, #1604S; Lithium: at least 2 years (for typical use) for battery types Ultralife # U9VL, U9VL-J | | Battery Supervision: | Automatic transmission of battery status data as part of any transmitted message | | Audible Low Battery Warning: | Built-in horn beeps once a minute for up to 30 days when the battery voltage drops | | Operating Temperature: | 32° F to 100° F (0° C to 38° C) | | Relative Humidity: | 10% to 85% | | Approvals: | FCC and Directive 1999/5/EC compliant | | Warranty: | 1 year, limited |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|