|
|
| Visonic MCT-100 Two-Input Universal Transmitter for SecureLinc Security Systems |
|
Item# 73917
|
|
Price: Normally $54.99
Hot Deal $35.50
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Two pair of contract closure sensor inputs, each can be normally closed or normally open
- Reliable wireless transmission of sensors to main security unit
- No need for long wire runs back to main security unit
Essential Info
This two-input universal transmitter by Visonic will allow almost any normally open (NO) or normally closed (NC) contact device to connect wirelessly with a Smarthome SecureLinc Home Security System, sold separately. The transmitter has been designed to communicate back to a SecureLinc Security Kit when a contact has been triggered. The most common applications for this device include protecting doors, windows or other objects in a variety of security and control applications. It is valuable in situations where running wire maybe difficult or impossible to achieve. This is a very reliable wireless piece of equipment that installs in minutes and can function in a wide range of residential and commercial applications.
Important notes:
- Smarthome offers technical support on this product. We offer (2) ways to contact us for technical support: CHAT (homepage button: Mon-Fri 9:00am-6:00pm ET) or Phone: 1-800-762-7846 (Mon-Fri 9:00am-9:00pm & Sat 10:00am-4:00pm ET)
- Defective exchanges for identical item within Manufacturer’s warranty period.
Manuals/Software
What's Included
Two-Input Universal Transmitter
Battery
Instructions
|
More Info
|
Protect doors, windows and other objects with this highly reliable device. Both inputs can be set to operate with a normally closed (N.C.) loop or with an end-of-line loop (E.O.L.) loop in which both N.C. and normally open (N.O.) sensors can be used. Each device is employed with a unique ID code and is available in several optional frequencies in compliance with international standards.
When activated, each input initiates an individual 24-bit PowerCode™ ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce
Features
Two inputs, each with an individual ID code.
User can select operation of each input as NC (normally closed loop), or EOL (end-of-line loop with NC or NO sensors).
Offers superior transmission range.
Completely supervised.
PowerCode ID factory-selected randomly from an available 16 million possible combinations.
Intelligent anti-collision mechanism supports multiple simultaneous transmissions.
Standard long-lasting lithium battery included.
Comes with low-battery signaling.
|
Specifications
|
Specifications | | Manufacturer: | Visonic | | Manufacturer Product No.: | MCT-100 | | Frequency: | 315, 433.92 or other frequencies according
to local requirements | | Transmitter's ID Code: | 24-bit digital word, over 16 million
combinations, pulse width modulation | | Overall Message Length: | 36 bits | | Alarm Inputs: | 2, each with a separate 24-bit transmitter ID | | Input Circuit Type: | N.C. / E.O.L., selected with on-board DIP
switch | | E.O.L. Resistor Required: | 47 kOhmO | | Message Repetition: | Repetitive transmission (once every 3
minutes) or one-shot, as selected with on-board DIP switch | | Supervision: | Signaling at 60-minute intervals or according to
local standards from input 1 (if enabled) or from input 2 (if input 1
is disabled) | | Response to Tamper Event: | Tamper report every 3 minutes
(until the tamper switch is restored) | | Power Source: | 3.6 V battery, size 1/2 AA, Tadiran TL-5902 | | Current Consumption: | 5 µA standby, 8 mA in operation
(including LED) | | Battery Life Expectancy: | 3 years (for typical use) | | Battery Supervision: | Automatic transmission of battery
condition data as part of any status report | | Operating Temperature: | 0°C to 49°C (32°F to 120°F) | | | Dimensions: | 110 x 63 x 25 mm (4-5/16 x 2-1/2 x 1 in.) | | | Weight: | 66.5 g (2.34 oz) | | | Certifications: | Meets FCC Part 15, MPT1349
and Directive 1999/5/EC |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|