• Quickly and easily setup a wireless home security system
• Integrate INSTEON or X10 controlled lighting and/or appliances with the security system
• Program lights to flash when the alarm is tripped
• Setup a lighting schedule to give your home that lived in appearance while you're away
• Use a keyfob to turn on lights or appliances when you arrive at your home

Take advantage of integrating a wireless security system with INSTEON and/or X10 home automation devices. The SecureLinc Web-Enabled Home Security System operates as the backbone for this kit, allowing you to setup and program devices. A wireless motion sensor and two wireless magnetic door/window contact sensors are included to get you started with your home security. An X10 interface module will allow for communication with the included INSTEON ApplianceLinc module and SwitchLinc Relay switch. A pendant and a keyfob have also been included to remotely arm or disarm the security system or to remotely control an INSTEON or X10 controlled device. Using all of these items together will provide you with enhanced security and automation. Program your lights to flash when the alarm is tripped or turn on a light when a motion sensor detects movement or when a magnetic door contact is broken. Use the keyfob to turn on your lights as you approach your home and/or to turn lights on/off as you arm/disarm your system. You can even setup a lighting schedule using the SecureLinc's Scheduler to automatically turn on or off your perimeter or night lights for added security. The SecureLinc system is also web-enabled, by adding a PowerLink Web Interface Controller, you will be able to remotely control your entire system via the Internet. This expandable kit is a great way to start protecting and automating your home.

Important Note: If you do not have an INSTEON or X10 home automation system currently in place, a phase coupler may be required for communication to INSTEON or X10 devices. This system does not send out INSTEON signals, however it can control INSTEON devices using X-10 communication protocol.

• Setting up INSTEON and X-10 Devices with SecureLinc

SecureLinc panel

SecureLinc panel backing

SecureLinc panel mounting hardware

AC adapter

Power connecting wire

Ni-MH battery backup pack

Pendant transmitter

Transmitter neck chain

Transmitter battery

Transmitter instructions

Key ring

Screws (quantity 4)

End-of-line resistors

X10 cable and interface module for SecureLinc

85lb pet-immune wireless Motion Sensor

Wireless magnetic door / window contact sensor (quantity 2, ivory)

4-Button keyfob remote

ApplianceLinc - INSTEON plug-in appliance On/Off module, 3-Pin

SwitchLinc Relay - INSTEON remote control On/Off switch

Owner's manuals

Smarthome SecureLinc Web-Enabled Home Security System for the Elderly	Smarthome SecureLinc Remote-Access Security Kit	Smarthome SecureLinc Family Protection Kit	INSTEON-Compatible M1 Gold System W/Flush-Mount Keypad
Keypad Dimmer Scene Kit - INSTEON Lighting Starter Kit Keypad Dimmer Scene Kit - INSTEON Lighting Starter Kit	INSTEON Remotelinc Starter Kit, Black	INSTEON Wire-in Dimmer Scene Lighting Starter Kit	INSTEON Kitchen Lighting Starter Kit

Security Strobe Lights Blue Lens	Outdoor Siren For Securelinc Alarm System	RemoteLinc - INSTEON Lamp Control Starter Kit, Black	ToggleLinc Relay - INSTEON Remote Control On/Off Switch (Non-Dimming), White