• Includes TM-318 Wireless Remote Transmitter
• Simply replaces existing switch
• No neutral wire required
• 1,000 Watt Load
• Energy saving countdown mode
• Wireless range 300 feet

The WE-318 Lighting Receiver In-Wall On/Off Switch with Transmitter was designed to operate up to a 1,000 watt load at 120 volts of alternating current (120VAC), for either lighting or appliances. Skylink’s WE-318 is a kit which is comprised of the WE-001 Lighting Receiver In-Wall On/Off Switch, 1,000 Watts and the TM-318 Snap-On Wireless Remote Transmitter.The WE-001 features two operating modes: countdown mode and switch mode. The included remote features one button which has a toggle function turning the load on with one press and then off with a second press. Essentially it will send a command for the opposite operating mode to which the switch is currently functioning. For example, if the switch is currently on, then the transmitter will send an off command and vice versa. Pressing and holding the button on the TM-318 transmitter will allow you to brighten and dim loads controlled by a dimmer module. Users will release the button once they notice the light is at the appropriate intensity. One CR-2032 battery will be required in order to power the TM-318 remote transmitter (Included).

To use this relay switch, simply replace your old pre-existing switch with the new WE-001. Being that there is no neutral wire needed for the WE-001 to operate, replacing the old with the WE-001 will be as easy as disconnecting then reconnecting two wires. Once properly installed, you will be able to wirelessly control lights or appliances powered by the switch locally, or remotely with the included transmitter and a variety of other SkylinkHome transmitters. This switch offers a touch-sensitive surface allowing you to control the load with a brush of your finger across the surface. The snap-on wireless remote transmitter TM-318 (included) can be used as a remote controller for this dimmer and physically attaches to the switch face. When attached, the touch-sensitive surface is covered and the TM-318 is used as a standard local control of the load. To achieve remote control over the WE-001 from a wireless transmitter (included), you must first program the switch to be a responder of that transmitter. The programming is a very simple process done with the set buttons located on the switch and on the transmitter. A maximum of 8 transmitters can be paired to one WE-001 relay switch. This allows you to add more wireless hand-held remote controllers, or motion sensors to your system for flexibility, security, and comfort.

• WE-001 Owner's Manual
• TM-318 Owner's Manual

1x - WR-001 Lighting Receiver In-Wall On/Off Switch

1x - Package of wire nuts

1x - User's Instructions

SkylinkHome Lighting Receiver In-Wall Dimmer Switch with Transmitter, 300 Watts	SkylinkHome Battery-Operated Snap-On Wireless Remote Transmitter	SkylinkHome Remote Controllable Mini Screw-In Dimmer, 200 Watts	SkylinkHome Remote Controllable ON/OFF Screw-In Dimmer
Skylink Lighting Receiver In-Wall Dimmer Switch, 600 Watts	SkylinkHome Lighting Receiver In-Wall Dimmer Switch	Skylink Lighting Receiver In-Wall On/Off Switch, 1,000 Watts	Skylink Deluxe Hand-Held Wireless Remote Transmitter, 10-Button
Skylink Simple Hand-Held Wireless Remote Transmitter, 1-Button	Skylink Remote Controllable Wire-In On/Off Control Module, 600 Watts	Skylink Remote Controllable Indoor/Outdoor Plug-In On/Off Control Module, 1,500 Watts	Skylink Remote Controllable On/Off Plug-In Dimmer, 300 Watts

SkylinkHome TM-318 Battery-Operated Snap-On Wireless Remote Transmitter	SkylinkHome TM-001 Cover Unit	SkylinkHome TC-318-1 Simple 3-Button Remote	SkylinkHome WR-318 Lighting Receiver In-Wall Dimmer Switch with Transmitter, 300 Watts