• Trigger devices based on high or low humidity level (set by user)
• Self-contained unit
• Uses a sold state transducer
• Great for keeping your home comfortable and safe

The X10 Humidity Sensor/Controller provides a way to sense humidity levels and trigger X10 devices based on user settings. It interfaces to a standard X10 Powerflash device (sold separately). The sensor is completely self contained and uses a solid state transducer preset at the factory, with the trigger point adjustable between 15% to 95%. There are three leads extending from the sensor. Depending on your application, the user selection of leads determines turning on or off devices based on whether to trigger when the humidity is higher or lower than your preset value. The user selects two leads, sets the approximate humidity level using a small screwdriver, connects the sensor to the Powerflash terminals, plugs in the wall transformer, and places the sensor in the appropriate location.

This product is compatible with X10 devices only. For an INSTEON compatible version, consider using the INSTEON Humidity Sensor/Controller.

• Owner's Manual

1x - X10 Humidity Sensor/Controller

1x - Instruction Manual

Minotaur Engineering IHS INSTEON® Humidity Sensor/controller	Minotaur Engineering IWVT INSTEON® Water Variable Temperature Sensor	Minotaur Engineering TT-08 X10/INSTEON® TV Controller Timer	Minotaur Engineering LS2 INSTEON® Light, Dusk/Dawn Sensor

Minotaur Engineering VT1 X10 Variable Temperature Sensor	Minotaur Engineering LS1 X10 Light, Dusk/Dawn Sensor	X10 TM751 Compact X10 Plug-In RF Receiver Base	X10 HR12A or PHR03 Wireless X10 Remote Control