Add $175.00 for FREE shipping
Alert System Type
Temperature / Humidity Alert
Sensor Type
Humidity
Location
Indoor
Compatibility
Contact Closure / Relay
INSTEON
Features
Hardwired
Ease of Installation
Beginner (Installs < 10 minutes)
Brand
Minotaur Engineering
Other Ways to Shop
In Stock
On Sale
Trigger INSTEON® Enabled Devices by Humidity Level
Minotaur Engineering IHS Humidity Sensor/Controller
Minotaur Engineering IHS Humidity Sensor/Controller
Minotaur Engineering IHS Humidity Sensor/Controller
Item# 71945
Price: Normally $79.00 
Hot Deal $77.95
Qty:
Free shipping on orders over $175 - See Details

Overview

  • Trigger devices based on high or low humidity level (set by user)
  • Self-contained unit
  • Uses a sold state transducer
  • Great for keeping your home comfortable and safe

Essential Info

Be aware of humidity problems as soon as they start with this humidity sensor that triggers I/O Linc-connected lamps to flash. The Minotaur Engineering IHS Humidity Sensor/Controller for INSTEON I/O Linc triggers based on a humidity level that you set (15% to 95%) and sends a signal to any INSTEON receiver in range via an I/O Linc (sold separately). The sensor is completely self contained and uses a solid state transducer preset at the factory. There are three leads extending from the sensor. The sensor should be placed in a location that will protect it from moisture and direct sun to accurately reflect the ambient humidity.

Manuals/Software

What's Included

  • 1x - Minotaur Engineering IHS Humidity Sensor/Controller for INSTEON I/O Linc
  • 1x - Owner's Manual

  • More Info

    The INSTEON Humidity Sensor/Controller connects to the I/O Linc unit via three leads on a 5-foot cable. The IHS senses the ambient room humidity using a sophisticated semiconductor device. It draws power from the I/O Linc module and triggers based on a user setting. Humidity will vary from room to room and from one area of a room to another. Ventilation and airflow will affect relative humidity. The IHS has a delay/ spread of about 3% RH. Always allow enough time for the sensor to acclimate to current room conditions before expecting it to trigger accurately.

    NOTE: Observe polarity in connecting to the I/O Linc. Incorrect wiring to the I/O Linc can destroy the device. If the I/O Linc and/ or INSTEON Responder have been used previously, they need to be set back to their factory settings prior to use. For residential use only. Do not submerge. Best operating temperature range is 55°F to 95°F.

    1) Connect the Shiny Metal sensor wire to the I/O Linc "GND" Terminal (2nd from the left screw terminal.)

    2) Connect the Black wire to the I/O Linc "SENSOR" Terminal (3rd from the left screw terminal.)

    3) Connect the Red wire to the I/O Linc "5v" Terminal (1st from the left screw terminal.)

    4) Plug your I/O Linc into an un-switched outlet. (The I/O Linc LED will come on.)

    5) Using a small screwdriver on the blue trimmer potentiometer located on the exterior of the sensor, turn the dial all the way to the left (counterclockwise) to get the humidity to trigger a device ON at or above the set humidity (Or OFF below a set humidity).

    6) Press and hold the I/O Linc Set button until it beeps (about 3 seconds.)

    7) Plug your INSTEON Responder (receiver) into an un-switched wall outlet.

    8) Now Press and hold the Set button on your INSTEON Responder (the device you wish to control) for at least 3 seconds. (The I/O Linc will beep and its Status LED will return to steady "on" to confirm linking.) The INSTEON device will be "triggered" based on being at a higher humidity than selected.

    9) Plug devices you wish to control into your Insteon Responder.

    10) Set your trigger humidity based on the instructions on the next page.

    Specifications

    Specifications
    ManufacturerMinotaur Engineering
    Manufacturer Product No.IHS
    Cord Length5'
    Dimensions1.3" dia x 1.25"
    Important notes:
    Defective exchanges for identical item within Manufacturer’s warranty period.

    Reviews

    7 Ratings
    5 star: 86%  (6)
    4 star: 0%  (0)
    3 star: 0%  (0)
    2 star: 14%  (1)
    1 star: 0%  (0)
    Average Customer Rating
    (7 customer ratings)
    Share your thoughts with other customers
    Van Robinson -- coffeyville, Kansas   1/19/2014
    Good. Would order again. I have a long good history with these and Smarthome in general.
    Vic Hastings -- berrybrook, OH   3/27/2013
    After a few days of slight adjustments, I have it working quite well.
    Tony Andrade -- st. petersburg, FL   1/2/2013
    Works well. More sensitive than I thought it would be which in the end was better for what I wanted to do.
    Keith Lingston -- Ontario BC   12/7/2012
    I tried one of these to sense conditions in a portion of my attic. It had been up there at least 5 months and I had forgotten about it. Suddenly it triggered exactly as planned. Good device and would order again.
    Lawrence V -- folson, CA   11/22/2012
    Works well, a day to get the setting just right, and then it has been perfect since.
    T -- litchfield, NH   11/3/2012
    Hard to "set" a%
    Anthony Viney -- bristol, CT   3/4/2012
    My buddy and I installed one of these this weekend. The unit is smaller than I thought would be, only a couple of inches across, with a small clear cap on the top. The instructions were fine, just remember you have to clear out the programming of your I/O linc if you have used it before. After we had the unit plugged in and set up, we went about setting the humidity. It took us a couple of tries to have it where we wanted it, but then it worked perfectly. In fact, at its most sensitive setting, just by breathing on the device, we could have it detect the higher humidity of our breath! That's cool.. Anyway, we have only had it for a few days but we have it turning on a fan as the humidity gets high. I may get one myself to turn on a humidifier in my wife's office when it gets too dry in there. So far, it has worked well.

    Accessories

    I/O Linc - INSTEON® Low Voltage / Contact Closure Interface ( 1 In / 1 Out )       
    I/O Linc - INSTEON® Low Voltage / Contact Closure Interface ( 1 In / 1 Out )       

    Related Items

    Customers Also Bought

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark