• Check voltage of power sources easily in the field without a multimeter
• Apply a simulated 1A or 500mA load to power sources to check the voltage under load
• Check polarity of wires using the illuminated power connector
• Check the amount of voltage drop over long cable runs
• Check the integrity of PTC fuses

The 5-in-1 Multi-Purpose 12VDC Power and Signal Tester from SECOLARM allows you to check that you have a sufficient power connection between electronic components. Easy to read LEDs make identifying your connections a breeze. Four individually lit LEDs show the strength of the voltage present from excellent to poor, while two separate LEDs show the progress of the test you are performing. The included alligator clips make clamping to wires or fuses a simple task. As a safety feature, the alligator test leads are designed to be unequal in length, which helps prevent them from touching one another during testing. The tester can be used to check voltage with a simulated 1A or 500mA load without the need for a multimeter, the polarity of wires using the illuminate power connector, the amount of voltage loss in long cable run applications, and the integrity of PTC fuses. An ideal application for the tester would be while installing surveillance cameras; if there is insufficient voltage for a camera, it would risk damage to the camera and not allow for a good signal.

• Owner's Manual

5-in-1 Multi-Purpose 12VDC Power and Battery Tester

Alligator clip attachment

Owner's manual

Coax Cable Continuity Tester	Black Battery Rack W/Tester	IR Tester LED	Volt Check
SoHo Cable-Check	Voltage Detector	LAN Cable-Check & Telephone Test Set

KT 8 Cable Cutter (Max 6-Gauge)	SoHo Cable-Check	RG59/RG6/RG6 Quad Flaring Tool	PT-525 Power Play 24-in-1 Multi-Tool