Overview
|
- Utilizes your home's existing cat. 5 cabling for inexpensive surveillance video transmission
- Transmits a B&W video signal up to 2,000 feet or color up to 1,300 feet
- No external power required
Essential Info
Many new homes and office buildings already contain structured cabling systems of not only electrical and phone wiring, but also inexpensive cat. 5 twisted pair cable, which is commonly used as a data line. Take maximum advantage of this existing wiring by adding baluns to each end for a fast, easy and low-cost way to connect a CCTV camera to a monitor, multiplexer or video recorder. The Gold-Plated BNC Snap-In Balun is designed to work in pairs, but each is sold separately. A cat. 5 patch cord is required for each end and is sold separately.
Manuals/Software
What's Included
Balun
Instructions
|
More Info
|
The Gold-Plated BNC Snap-In Balun converts BNC video signals from unbalanced to balanced and vice versa, making the necessary impedance adjustments for A/V signal transmission between different wiring systems. This means that you can run your surveillance signal up to 2000 feet over inexpensive cat. 5 wiring, rather than rewiring your home in order to send these signals from room to room.
No external power supply is required to send surveillance video over cat. 5 cable. Just connect your surveillance camera to the balun to transmit a black & white video signal up to 2000 feet or a color video signal up to 1300 feet.
The Gold-Plated BNC Snap-In Balun includes a BNC connector and a snap-in terminal block; there's no need to waste time crimping RJ-45 connectors. BNC baluns are also available with male snap-in or screw-in connections.
|
Specifications
|
Specifications | | SECO-LARM Product No.: | EVT-PBM-V27 | | Dimensions: | 2" x 7/8" x 3/4" | | Single Camera Range: | Color: 1300' (400m); b/w: 2000' (610m) | | Multiple Cameras Range: | Color: 1300' (400m); b/w: 2000' (610m) | | Video Format: | RS170, NTSC, PAL, SECAM, CCIR | | Maximum Input: | 1Vp-p | | Insertion Loss: | < 2dB per pair from DC ~ 8 Mhz | | Return Loss: | >-15dB from DC ~ 8 Mhz | | Frequency Response: | DC ~ 8 Mhz | | Attenuation: | 6.6 dB/1000 ft. @ 1MHz | | Common Mode Rejection: | 40 dB @ 8 MHz | | Impedance: | Coax, Male BNC: 75 Ohms @ 1 MHz | | Power: | No power required | | Surge Protection: | Transient immunity: 6000V at 1.2 µs * 50 µs | | Wire Type: | UTP (Unshielded Twisted Pair) 16 - 24 AWG | | Wire Category: | Category 2 or better | | UTP Connection: | RJ-45. Pins 7 & 8. Reverse polarity sensitive | | Case: | ABS Plastic | | Temperature Range: | 32° F ~131° F (0° C~55° C) | | Humidity: | 0 ~ 95% | | Approvals: | CE listed, FCC compliant |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
View Cart 
