• Easily connects to an alarm panel and automatically dials out when activated
• Two independent voice messages. Stores up to four telephone, cellular or pager numbers
• Delivers a message of up to 16 seconds to each number stored
• Instant trigger or exit and entry delay settings
• Repeats the voice message for one minute per call
• Calls two times when there is no answer or three times when the line is busy
• 2 NO/NC trigger inputs

SECO-LARM’s Automatic Voice Dialer automatically dials up to four telephone numbers and delivers up to two different messages when triggered by an alarm system. The system has two independent voice messages and can store up to four telephone, cellular or pager numbers. The device repeats the voice message for one minute per call and waits eight to 10 rings before dialing the next programmed number. An optional 9V internal battery provides standby power for approximately two to three days if power is lost.

Other Features

Waits 8 to 10 rings before dialing the next programmed number

Optional 9-Volt internal battery provides stand-by power for approximately two to three days

EEPROM retains memory if power is lost for up to one year

Can be used worldwide due to Universal Dial Tone

Can be used with PBX and regular telephone systems

• Owner's Manual

12VDC 500mA Regulated Power Supply	Universal Power Group, Inc D5733 4.5 Amp Sealed Lead-Acid 6 Volt Battery	ApplianceLinc - INSTEON Plug-in Appliance On/Off Module, 3-Pin	SECO-LARM SK-910RBQ 1-Ch RF Receiver, 315MHz