|
Find Similar Products in:
|
|
Monitor Temperature in Tight Locations with the IMS-4000 System
|
|
|
Sensaphone IMS-4812 Mini Temperature Sensor
|
|
| Sensaphone IMS-4812 Mini Temperature Sensor |
|
Item# 70077
|
|
Price: Normally $79.00
Hot Deal $74.98
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Connects to a Host or Node with RJ-45 Jack
- Sensor is automatically recognized and configured
- Compatible with IMS-4000 System
- Notification if disconnected
Essential Info
The Sensaphone IMS-4812 Mini Temperature Sensorr is designed to connect to the Sensaphone IMS series product line and monitor temperatures in tight locations (for example, inside equipment racks). The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor may be secured inside equipment using double-sided tape (included) or with tie-wraps.
The Mini-Temperature Sensor comes with an attached 7’ cable with a RJ-45 plug on the end. If the sensor is close to the IMS unit, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
Once connected, the IMS-4000 will automatically recognize the type of sensor installed and configure it for you, using a standard template that you can modify. Because the IMS-4000 supplies power and configuration data for each sensor, the IMS-4000 can detect faults with your sensors: If there’s a cable disruption or your sensor is accidentally unplugged, you’ll know it.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
What's Included
Temperature sensor
Attached 7’ Patch Cable
Double-sided tape
|
More Info
|
Whether you have a small room, or a large data center, the Sensaphone IMS-4000 System provides complete monitoring for your computer facility. It is designed to monitor your entire infrastructure, which includes the environment, the physical security, and the network operation.
The Sensaphone IMS-4000 system is a stand alone infrastructure monitoring system with an integrated voice and modem, an internal UPS, flash-disk storage, and a web server, in a simple-to-install 1U rackmountable package. From the wide array of its plug-and-play monitoring devices to its sophisticated software, the IMS-4000 is a complete, flexible, integrated system.
Environmental Monitoring
Monitor critical environmental conditions such as Temperature, Humidity, Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the IMS-4000 Host and Node. Each Host and Node unit supports up to eight Environmental Sensors. When a sensor exceeds the threshold you configure (high temperature for example) you are notified by the IMS-4000 about the condition. Lights on the face of the IMS Host instantly reveal any outstanding problems. With sound level monitoring you can be notified if an audible alarm goes off, and you can remotely listen in, via the Host unit, to the server room to assess the situation yourself at any time.
IP Monitoring
The IMS-4000 monitors IP Devices through pinging and port availability. When a network component becomes unavailable, the IMS-4000 notifies you about which IP device is unavailable. You can monitor the status of network links, routers, printers and servers—any device which has an IP address. Each IMS-4000 Host and Node can monitor up to 64 devices. When a device does not respond to the IMS query, it contacts you immediately to alert you to the situation.
Notification
When a problem occurs in your network, the IMS-4000 will find you and notify you of the problem no matter where you are. Multiple communication interfaces, Ethernet port and standard telephone interface, guarantee that you get the message. You receive early notification before a problem turns into a disaster. The integrated modem / voice interface of the IMS-4000 Host means network events and environmental problems are sent to you in your own voice. When all you have is a phone, you will still know what’s going on in your network. You get the message fast.
Status
Curious about your network? You can always obtain status information about your infrastructure - anytime, anywhere. Call into the IMS-4000 using your computer’s standard dial-up networking. The IMS Console software operates the same remotely as it does locally for complete management and control of your IMS system. If you’re not near a computer, then just pick up any phone and call into the IMS-4000: It will tell you in a real voice report the status of all conditions.
Available Sensors for IMS-4000 System:
Wireless:
Temperature Sensor
Outdoor Temperature Sensor
Humidity Sensor
Dry Contact Sensor
Power Sensor
4-20mA Transducer Bridge
Spot Water Sensor
Zone Water Sensor
Hardwired:
Dual Relay Output Module
Temperature Sensor
Temperature Sensor with LCD
Humidity Sensor
Humidity Sensor with LCD
Water Sensor with 10’ Water Rope
External Power Sensor
15A Current Sensor
20A Current Sensor
Dry Contact Bridge
Door Switch with Bridge
Passive Infrared Motion Sensor
Smoke Detector
Mini Temperature Sensor
4-20mA Transducer Bridge
Airflow Sensor
|
Specifications
|
Temperature Range: 5° to 140°F
Humidity: 5 to 90% RH
Sensor type: Solid state ic
Accuracy: ± 3°F
Connector: 7’ cable with RJ-45 plug
Housing: Black plastic
Dimensions: 2.13" x 0.6" x 1.38"
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|
|