Add $175.00 for FREE shipping
Add a Wireless Power Sensor to the IMS-4000 System
Sensaphone IMS-4213 Wireless Power Failure Sensor
Sensaphone IMS-4213 Wireless Power Failure Sensor
Sensaphone IMS-4213 Wireless Power Failure Sensor
Item# 70059
Free shipping on orders over $175 - See Details

Overview

  • Connects to wireless node
  • Compatible with IMS-4000 System
  • Notification if disconnected

Essential Info

The Sensaphone IMS-4213 Wireless Power Failure Sensor provides remote contact monitoring without running wires. The power status is monitored by the wall plug in adapter and sent from the sensor to the IMS-4200 Wireless Node via an integrated 2.4GHz wireless radio. The device can transmit its signal up to 250' indoors and even greater distances when it has line-of-site. The IMS- series of wireless sensors also feature mesh networking technology, which allows each sensor to be used as either a wireless sensor/router or as a low-power battery operated sensor (also referred to as an end device). When used as a router, greater distances can be realized because each sensor/router adds another 250' of range to the system. The sensor comes with 3 AA alkaline batteries which will power the sensor for up to 2 years (end device mode). A plug-in power supply is included. The batteries funciton as backup power when main AC power fails.

What's Included

  • Wireless power sensor
  • 5VDC Wall plug-in power adapter
  • 2 Plastic drywall anchors
  • 2 #6 Metal tapping screws
  • 3 AA alkaline batteries

  • More Info

    Whether you have a small room, or a large data center, the Sensaphone IMS-4000 System provides complete monitoring for your computer facility. It is designed to monitor your entire infrastructure, which includes the environment, the physical security, and the network operation.

    The Sensaphone IMS-4000 system is a stand alone infrastructure monitoring system with an integrated voice and modem, an internal UPS, flash-disk storage, and a web server, in a simple-to-install 1U rackmountable package. From the wide array of its plug-and-play monitoring devices to its sophisticated software, the IMS-4000 is a complete, flexible, integrated system.

    Environmental Monitoring
    Monitor critical environmental conditions such as Temperature, Humidity, Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the IMS-4000 Host and Node. Each Host and Node unit supports up to eight Environmental Sensors. When a sensor exceeds the threshold you configure (high temperature for example) you are notified by the IMS-4000 about the condition. Lights on the face of the IMS Host instantly reveal any outstanding problems. With sound level monitoring you can be notified if an audible alarm goes off, and you can remotely listen in, via the Host unit, to the server room to assess the situation yourself at any time.

    IP Monitoring
    The IMS-4000 monitors IP Devices through pinging and port availability. When a network component becomes unavailable, the IMS-4000 notifies you about which IP device is unavailable. You can monitor the status of network links, routers, printers and servers—any device which has an IP address. Each IMS-4000 Host and Node can monitor up to 64 devices. When a device does not respond to the IMS query, it contacts you immediately to alert you to the situation.

    Notification
    When a problem occurs in your network, the IMS-4000 will find you and notify you of the problem no matter where you are. Multiple communication interfaces, Ethernet port and standard telephone interface, guarantee that you get the message. You receive early notification before a problem turns into a disaster. The integrated modem / voice interface of the IMS-4000 Host means network events and environmental problems are sent to you in your own voice. When all you have is a phone, you will still know what’s going on in your network. You get the message fast.

    Status
    Curious about your network? You can always obtain status information about your infrastructure - anytime, anywhere. Call into the IMS-4000 using your computer’s standard dial-up networking. The IMS Console software operates the same remotely as it does locally for complete management and control of your IMS system. If you’re not near a computer, then just pick up any phone and call into the IMS-4000: It will tell you in a real voice report the status of all conditions.

    Available Sensors for IMS-4000 System:

    Wireless:
  • Temperature Sensor
  • Outdoor Temperature Sensor
  • Humidity Sensor
  • Dry Contact Sensor
  • 4-20mA Transducer Bridge
  • Spot Water Sensor
  • Zone Water Sensor

  • Hardwired:
  • Dual Relay Output Module
  • Temperature Sensor
  • Temperature Sensor with LCD
  • Humidity Sensor
  • Humidity Sensor with LCD
  • Water Sensor with 10’ Water Rope
  • External Power Sensor
  • 15A Current Sensor
  • 20A Current Sensor
  • Dry Contact Bridge
  • Door Switch with Bridge
  • Passive Infrared Motion Sensor
  • Smoke Detector
  • Mini Temperature Sensor
  • 4-20mA Transducer Bridge
  • Airflow Sensor

  • Specifications

  • Dimensions: 6.8" x 3.5" x 1.5"
  • Operating Temperature Range: 32° to 95°F
  • Operating Humidity Range: 5-90% RH
  • Range (Indoor/Urban): Up to 250’ (76m)
  • Transmit Power Output: 100mW (20dBm)
  • Power Requirements: (3) AA Batteries / 5VDC Power Supply
  • Important notes:
    Only defective exchanges for identical item within 30 days of purchase. No other returns allowed on this item. For defective returns after 30 days, please contact the manufacturer.
    Manufacturer contact information: Sensaphone Inc, Tel: (877) 373-2700 Ext 260

    Reviews

    Accessories

    AA Batteries       
    AA Batteries       

    Related Items

    AA Batteries       
    AA Batteries       
    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark