|
|
|
| Sensaphone (4 Inputs/4 Number Dialout) |
| Item# 7005 |
|
|
|
|
|
Overview
|
- Automatically calls 4 numbers to report alert conditions
- 4 inputs: Temperature or NO/NC sensors
- 10 hour battery backup in event of power failure
- Built-in microphone and power outage sensor
- New updated Sensaphone with additional features available here!
Essential Info
Monitoring and having control of your property while you are away has never been easier! With the Sensaphone Remote Monitoring and Control, a synthesized voice will call up to eight phone numbers to contact and advise you of the temperature and status of sensors over the phone. The Sensaphone monitors high/low temperatures, power failure, water leaks and seepage, humidity, intrusion/unauthorized entry and loud loises. This innovative device can save you thousands of dollars in damage due to heating/cooling or power failures, leaks and extreme weather conditions. The Sensaphone can be used with any NO/NC sensor on our Sensors page. The Sensaphone uses 6 "D" cell alkaline batteries, which are not included. This version of the Sensaphone has been discontinued and replaced with an updated version with additional features. Click here for details!
Manuals/Software
What's Included
FGD-1104 Sensaphone (4 Input/ 4 Dialout)
AC Power Adaptor
|
More Info
|
Save your property and equipment from costly damage by being warned in time. Protect vacation homes, water pipes, aquariums, pets (farm animals), scientific experiments, computer equipment and more. Install this Sensaphone unit and it will call you when any of the sensors go beyond the preset limits. Four inputs can be used for temperature or normally open/normally closed sensors (one temperature sensor is included). Call in at any time and obtain a status report for your peace of mind. The built-in Sensaphone microphone detects loud noises that continue for more than a preset time (user adjustable) eg. security system or smoke detector and also allows you to listen in when you call in (or it calls you). When the Sensaphone begins calling out in response to an alert, it will continue calling in sequence the four numbers (up to 32 digits each, for use with pagers or calling cards) you set until the call is answered and acknowledged with an input code or callback. It will also stop if the maximum number of calls (up to 255, user-programmable) is reached. Answering machines will not disable the callout. Acknowledgment of the alarm will stop the callout but does not stop the alert condition. You can call in later and find out the status of the alert. The alert condition ceases only when the Sensaphone sensor readings go back to normal.
Sample Telephone Status Report:
"Hello, this is telephone number (949) 221-9200, the time is 12.15 pm."
"Alert Condition 1 OK, Alert Condition 2 EXISTS" (sensor 2 tripped),
"Alert Condition 3 OK, Alert Condition 4 OK."
"The temperature is 70 degrees... OK" (inside temperature),
"Two... the temperature is 40 degrees" (remote temperature),
"The temperature is LOW" (remote temp beyond preset limits).
"The Electricity is ON. Battery condition OK. Sound Level OK."
"Listen to sound level for 30 seconds" (programmed listen-in time)
"Have a good day."
Call 949-221-9200 ext. 282 to hear an actual Sensaphone report.
Works with Answering Machines and X10 Telephone Transponders (5000)
The Sensaphone will not interfere with your answer machine or your X10 telephone responder! It can be programmed in such a way that you dial in, let it ring once, hang up, wait 10 seconds, then dial in again, and it will answer immediately. If you want to control X10 then just dial in as you normally would.
This is an industrial quality Sensaphone unit that has been in daily use for years monitoring commercial aquariums, livestock and other valuable property. Choose the Sensaphone when you want the greatest level of peace of mind.
|
Specifications
|
Specifications | | Sensaphone Product No.: |
FGD-1104 | | Inputs: | 4 numbers, up to 32 digits each | | Battery: | Uses 6 "D" Cell alkaline batteries (not included) for battery backup. AC power adapter included. | | Temperature sensing range: | Fahrenheit (-20°F to 150°F) or Celsius (-29°C to 65°C) | | Weight: | 2.78 lbs |
| Dimensions: | 7.8" x 8.8" x 2.1" |
Have your Sensaphone installed!
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|