|
|
| Niles Audio IW770FX StageFront 7 Inch In-Wall Home Theater Loudspeaker (Pair) |
|
Item# 67286
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Forward-firing, 7" Interlaced Carbon-fiber Woofer With Butyl Rubber Surround
- Forward-firing 1" Fluid-cooled Teteron® Dome Tweeter
- Dual Side-firing 4" Carbon-fiber Midrange Drivers
- Dual 1" Teteron® Dome Tweeters
- 12V Controlled Dipole/Bipole Relay
- Cross-braced Ported Cabinet With Integrated Frame Design
- Epoxy-coated MicroPerf Grille Provides An Elegant Yet Unobtrusive Appearance
Essential Info
The StageFront IW770FX Home Theater Solutions In-Wall Loudspeaker is expressly designed for superior sonic quality in home theater applications. This model employs advanced technology components that extract the subtle nuances in recorded music or the thunderous action sound in a movie. The IW770FX is intended primarily for special effect placement. StageFront models are the perfect choice wherever quality of sound is the most important consideration.
For satisfactory performance, we recommend using a surround amplifier with a power rating of 15 to 125 watts. Most loudspeakers are not damaged by large amplifiers, but rather by small amplifiers. If your system is playing loud music, a small amplifier will run out of power very quickly and can create damaging "clipping" distortions. A more powerful amplifier will play at the same volume without distorting.
Each StageFront FX loudspeaker is equipped with a BIPOLE/DIPOLE front switch as well as a 12 volt trigger jack on the rear of the enclosure. This jack will switch the StageFront FX loudspeaker from the front switch setting to its opposite position (such as from a setting of Dipole to Bipole) for as long as voltage is applied to this connection. These controls optimize the surround effects for either side or rear placement as well as various surround modes.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Only defective exchanges for identical item within 30 days of purchase. No other returns allowed on this item. For defective returns after 30 days, please contact the manufacturer.
Manuals/Software
|
More Info
|
INTERLACED CARBON-FIBER WOOFER WITH BUTYL RUBBER SURROUND
Provide increased sound pressure levels and sustained high-power output
DUAL SIDE-FIRING CARBON-FIBER MIDRANGES WITH DUAL TETERON™ DOME TWEETERS
Enable sustained high power playback and diffuse sound fields for optimum surround effects
FORWARD-FIRING FLUID-COOLED TETERON™ DOME TWEETER
Delivers ultra-wide dispersion and silky-smooth response
12V CONTROLLED DIPOLE/BIPOLE RELAY
Accommodates automated DVD-Audio or Dolby® surround sound effects
FRONT-MOUNTED DIPOLE/BIPOLE SWITCH AND EFFECTS LEVEL CONTROL
Enables fine-tuning after installation
CROSS-BRACED PORTED CABINETS WITH INTEGRATED FRAME DESIGN
Fits standard 2x4 construction and is easily retrofitted
EPOXY-COATED MICROPERF™ MAGNETIC GRILLE
Provides an elegant yet unobtrusive appearance
DOLBY DIGITAL® READY
StageFront Home Theater Solutions loudspeakers are expressly designed for superior sonic quality in home theater applications. All models exceed the specifications set forth by Dolby Laboratories for the accurate reproduction of Dolby Digital-Encoded Sources
|
Specifications
|
| Specifications | | Manufacturer: | Niles Audio | | Manufacturer Product No.: | IW770FX, FG01328 | | Recommended Amplifier Power: | 15 to 125 watts per channel | | Nominal Impedance: | 6 ohm nominal;3.2 ohm minimum | | Frequency Response : | 70Hz to 20kHz, +/- 3 dB | | Sensitivity: | 90 dB with 2.83 V pink noise input measured at 1 meter on axis | | Frame Dimensions: | 25-3/4" x 12" | | Hole Cut-Out Dimensions: | 24-1/4" x 10-1/2" | | Depth From Front of Wall: | 3-7/8 Inches | | Wiring Requirements: | 16-gauge loudspeaker wire recommended for runs up to 80 feet | | Manufacturer Warranty: | Lifetime Limited Warranty |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|