• 8-Inch Woofer designed for optimum low frequency reproduction
• High power handling - up to 150 Watts
• Selectable low-pass filter and high pass filter
• 1/2" round molded "IR Sensor Knockout" on the face of the speaker baffle
• Ideal for new construction or retrofit applications

The PSW8 wall mount subwoofer is uniquely designed to provide unobtrusive low frequency sound in your home theater and/or surround sound system. An 8-inch injection-molded TCC (Talc, Carbon, and Ceramic-filled) cone reduces breakup and lowers distortion even under high power up to 150 Watts; the butyl rubber cone surround dampens resonance and provides exceptional durability, an exceptionally heavy-duty magnet/voice-coil/spider structure ensures powerful bass response, and an inverted dust cap increases stiffness-to-mass ratio and reduces distortion. Each of these feature combined makes for a subwoofer that is light weight and delivers accurate, dynamic response. The PSW8 works in a standard 2 x 4 stud wall with varying air volumes and does not require a special enclosure to provide high performance. The selectable high and low-pass filters make it suitable for use with a wide variety of satellite speakers.

Additional Features
Snap-in assembly makes installation of Niles speaker baffles easier and faster than other in-wall brands, and leaves an absolutely flush to the wall appearance, even with the aluminum grilles installed. Retrofit installations are simple and fast, as a supplied template assures accurate hole cutting, allowing the bracket to slips behind the drywall and the screws secure the bracket to the speaker frame. Color coded no-strip terminal enables speakers to be connected without stripping the speaker wire. Antiresonant Wave Bracing keeps bass tones rich and dynamic. The speaker baffle has a locator designed for the Niles MS110 MicroSensor, which can be installed discreetly behind the aluminum grille, so when you want to control your equipment, you simply point your remote control at the speaker from up to 15 feet away. The baffle-mounted low pass crossover control adjusts filter settings at 100Hz or 140Hz while the high pass crossover control selects filter bypass or 120Hz setting.

Installation options include the following corresponding products:
Bracket Kit - Required

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Owner's manual

1x - Subwoofer

1x - Frame

1x - Cutout template

1x - Aluminum Grille

1x - Owner's Manual

Niles SW10 10-Inch Powered Subwoofer (Each)	Niles SW10JM 10-Inch Passive Joist-Mount Subwoofer (Each)	Niles SW10WM 10-Inch Passive Wall-Mount Subwoofer (Each)	Niles SW12 12-Inch Powered Subwoofer (Each)

Channel Vision IW65B 6.5-Inch Pre-Construction Bracket for Channel Vision IW614 Speakers	Channel Vision LCR625 6.5-inch Left / Center / Right Channel In-Wall Speaker, 150 Watts (Each)	DataComm Electronics 45-0031-WH Recessed Low Voltage Media Plate with Duplex Receptacle, White	DataComm Electronics 45-0002-WH Double Gang Recessed Wall Plate, White