Click for larger image and other views
|
|
| Niles Audio CM750Si 7-Inch Stereo Input In-Ceiling / In-Wall Speaker with Pivoting Tweeters (Each) |
|
Item# 67227
|
|
|
|
|
Free shipping on orders over $50 - See Details
|
|
Overview
|
- Get stereo sound from a single speaker
- 7-inch injection-molded TCC woofer provides "Best in Class" bass
- Dual 1" pivoting tweeters offer specific direction for high frequencies
- Handles up to 125 Watts of power
- Weather resistant design for indoor and outdoor use
Essential Info
If you plan to install a home theater system, give it a professional finish with this Niles Audio CM750Si Stereo Input In-Ceiling / In-Wall speaker. The speaker has a dual voice coil design which provides left and right channel stereo sound form a single speaker. The 7-inch injection-molded TCC (Talc, Carbon, and Ceramic-filled) woofer is rigid to reduce breakup, lower distortion and provide enhanced bass response. The woofer is light, strong and damped, with a full 7-inch size that fits in the same size outer dimensions as most other 6 1/2-inch woofers. An integrated woofer/baffle setup allows for increased woofer surface area, delivering more bass in less space with greater dynamic range. The butyl rubber surround increases sensitivity while preserving strength of sound. The dual 1" pivoting fluid-cooled Teteron tweeters provide wide dispersion for clear and detailed high frequency sounds from both the left and right channels at opposing angles to preserve stereo separation. Constructed of high-impact ABS, this speaker is extremely durable, featuring weather resistant material and a UV (ultraviolet) additive to resist the "yellowing" that can occur over time when exposed to sunlight - which reduces installation limitations and provides unique solutions in moist environments or outdoors under eaves. Included is a paintable flush-mount aluminum grille that is acoustically transparent and lets sound pass through for a clean, discrete installation. The Niles Audio CM750Si 7-inch stereo/input in-ceiling / in-wall speaker handles up to 125 Watts of power from a stereo or amplifier. If your home theater doesn't offer that much power, or you don't need pivoting tweeters, take a look at the Niles Audio CM730Si speaker (100 Watts). Please Note: CM Series speakers from Niles are designed for an in-ceiling (ceiling mount) installation as their primary application, but can be used for an in-wall (wall mount) application as well. This speaker works with: CM700 7-Inch Hole Cover
Manuals/Software
What's Included
1x - loudspeaker
1x - Aluminum MicroPerf Grille
1x - Cardboard paint mask/hole cutout template
|
More Info
|
Installation
This speaker is designed to be installed in any standard ceiling. There are two considerations for placing your speakers; ease of running the cable to the loudspeaker and coverage of the loudspeaker. The best stereo effect will be achieved if the loudspeaker is placed in the center of the listening area. Avoid installing the loudspeaker near a corner to prevent a 'boomy' or diffracted sound. CM700 series speakers will cover an area of a circle with a 16-foot diameter when mounted at an 8-foot height.
Running Wire in Walls or Ceilings
When running speaker wire inside walls or ceilings, use special jacketed cable (a minimum of 18 to 16-gauge two-conductor CL-2 or CL-3 rated loudspeaker wire) to protect the wire and for fire prevention. In some areas, conduit is also required. For a trouble-free installation, low-voltage wire such as loudspeaker wire must be run in accordance with the National Electrical Code and any applicable provisions of the local building code. If you are unsure of the correct installation techniques, wire jacket, or type of conduit to use, consult a professional audio/video installer, building contractor, or the local building and inspection department.
|
Specifications
|
| Specifications | | Manufacturer | Niles Audio | | Manufacturer Product No. | CM750Si, FG01305 | | UPC | 760514013056 | | Construction | 7" injection-molded TCC woofer with butyl rubber surround and two pivoting 1'' Teteron tweeters with fluid cooling | | Recommended Amplifier Power | 10 To 75 Watts | | Frequency Response | 55Hz To 21kHz +/-3dB | | Impedance | 8 Ohm Nominal;6 Ohm Minimum | | Sensitivity | 89 dB with 2.83 V pink noise input measured at 1 meter on axis | | Frame Dimensions | 9-1/4" (23.5cm) Diameter | | Hole Cutout Dimensions | 8" (20.3cm) Diameter | | Depth Behind Ceiling | 4-3/8" (11cm) | | Warranty | Manufacturer Lifetime Limited |
|
|
|
Important notes:
Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
Manufacturer contact information: Niles Audio Corp, Tel: (305) 238-4373
|
Images/Video
|
|
|
Reviews
|
|
|
Accessories
|
|
|
|
|
|