Add $175.00 for FREE shipping

Save Energy by Automating Lights to be On Only when an Area is Occupied
Lutron LRF2-OCRB-P-BL Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor, Black
Lutron LRF2-OCRB-P-BL Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor, Black
(Appears in White)
Lutron LRF2-OCRB-P-BL Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor, Black
Item# 6610CBK
Free shipping on orders over $175 - See Details

Overview

  • Automate Maestro Wireless devices to turn on when you're in the room and off when you aren't
  • Passive infrared motion detection offers precise motion detection
  • Three settings: Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-Off
  • Multiple ceiling-mount methods available for different ceiling materials
  • Battery powered - no wiring required

Essential Info

The Lutron Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor are battery-powered passive infrared (PIR) sensors that can automatically control lights or fans on a Lutron Maestro Wireless system. The Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor detects the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmits the appropriate commands to an associated Maestro Wireless devices (or devices) to turn on or off automatically. Up to 3 sensors can be added with each RF dimming or switching device for extended coverage. Each sensor may be added to up to 10 compatible RF dimming and switching devices for spaces with multiple zones of lighting. They combine both convenience and exceptional energy savings along with ease of installation. This item requires one CR-123 battery.

This product is also available in white and light almond.

Please Note: This product also works with Lutron RadioRA2 and GRAFIIK Eye QS Wireless systems.

Manuals/Software

What's Included

  • 1x - LRF2-OCRB-P-BL Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensor, Black
  • 1x - CR-123 Battery
  • 1x - Mounting Hardware
  • 1x - Installation Guide

  • More Info

    Additional Key Features
  • Auto-On Low-Light feature will only turn lights on automatically if there is less than approximately 1 fc (10 lux) of ambient light
  • 360° coverage ranges from 324 sq. ft to 676 sq. ft. for superior fine motion detection
  • Simple and intuitive adjustments available for Timeout, Auto-On, and Sensitivity settings
  • Front accessible test buttons make setup easy
  • Lens illuminates during test mode to verify ideal locations
  • Meets CA Title 24 requirements
  • RoHS compliant
  • 10-year battery life design

  • Sensor Placement
  • The sensor's ability to detect motion requires line-of-sight of room occupants. The sensor must have an unobstructed view of the room. DO NOT mount behind or near tall cabinets, shelves, hanging fixtures, ceiling fans, etc. The sensor cannot see through glass objects such as patio or shower doors.
  • Hot objects and moving air currents can affect the sensor's performance. To ensure proper operation, the sensor should be mounted at least 4 ft (1.2 m) away from light bulbs below the ceiling line and HVAC vents.
  • The sensor's performance depends on a temperature differential between the ambient room temperature and that of room occupants. Warmer rooms may reduce the sensor's ability to detect occupants.
  • The sensor should be mounted within 60 ft (18 m) line of sight or 30 ft (9.1 m) through walls, of the associated dimming and switching receiving devices.

  • Drop Ceiling (Compressed Fiber Ceiling Tile) Mounting
    The ceiling tile mounting wire is provided for both temporary and permanent mounting of the sensor to ceiling tiles. It is designed to allow temporary mounting, testing, and repositioning (if necessary) of the sensor without damaging a ceiling tile. Once the sensor's final position has been chosen, the mounting wire should be twisted to lock the sensor in place permanently.
    Solid Ceiling (Drywall, Plaster, Concrete, or Wood) Mounting
    Temporary mounting: Two 3MTM Command adhesive strips are provided for temporarily mounting and testing the sensor. These strips are designed for easy, damage-free removal and are not reusable.
    Permanent mounting: Screws and anchors provided to mount sensor.
    Please Note: Temporary mounting is recommended to test sensor coverage and wireless communication before permanently installing the sensor.

    About Maestro Wireless
    Maestro Wireless is a light control system that allows you to create custom solutions for anywhere in your home. It consists of radio frequency (RF) devices that are easily configured to communicate together for wireless control of lights. The system includes dimmers, switches, lamp dimmers, occupancy sensors and Pico wireless controls. Companion dimmers and companion switches are available for multi-location control. Choose the products that meet your needs. Compatible Lutron Maestro Wireless Products:
    Clear Connect RF Technology
    Clear Connect is a proprietary wireless protocol, so interference from other devices is nearly impossible. And because each control is uniquely addressed, the risk of interference from other sensors is eliminated. With Clear Connect, the sensors communicate flawlessly, every time.

    Specifications

    Specifications
    Manufacturer:Lutron
    Manufacturer Product No.:LRF2-OCRB-P-BL
    UPC:027557798495
    Operating Current:20 ?A nominal
    Power Requirements:Requires two CR 123 lithium batteries
    Approximate Battery Life:10-year battery life design
    Internal Memory:Non-volatile memory (saved changes are stored during power loss)
    Sensor Coverage Test:Front accessible test button; Lens illuminates orange in response to motion during test mode and is visible from 30 ft (9.1 m)
    Wireless Communication Test:Front accessible test buttons; Turn loads on and off
    Timeout Options:5 minutes, 15 minutes, 30 minutes
    Sensitivity Options:Low Activity (default); Medium Activity, High Activity
    Warranty:Manufacturer 1 Year Limited Warranty
    Important notes:
    Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
    Manufacturer contact information: Lutron Electronics Co Inc, Tel: (800) 523-9466

    Reviews

    Related Items

    Sign-up for Exclusive Email offers 
    ORDERING INFO
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    MORE INFO
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    OUR COMPANY
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    STAY INFORMED
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark